What's new

Tsunami 24mm - May the fog begin

cptfrederickson

Postman
Joined
Jun 1, 2016
Messages
831
So after some disappointments with my new (first) sub ohm tank, I got my tsunami 24mm through the post. First chance I had I coiled and wicked it (had some pre-built coils from fasttech, so was cheating a bit).
Tried my hand at scottish roll wicks, it went ok but I could use some practice to get it perfect. Fitted dripped and the forecast is cloudy :)
I am hugely surprised at the density and volume of clouds this thing chucks! 70/30 juice, 0.44 ohm dual coil claptons. Next step; make some coils! I highly recommend this deck, so easy to work with as a first timer and the results were great.
 
Just be cautious removing the cap to re-drip, I've wrecked 3 sets of coils taking the top off!
 
Yeah? I've neen fine so far, will be careful now though!
Just a thought, as this is my first RDA a little coil guidance wouldn't go amiss. What would people suggest is 'too many coils' for this deck. The thing is huge! I was thinking 24 gauge kanthal, 3.5mm ID to get 0.5 ohm dual coil. 9 or 10 wraps. Too much?
 
Yeah? I've neen fine so far, will be careful now though!
Just a thought, as this is my first RDA a little coil guidance wouldn't go amiss. What would people suggest is 'too many coils' for this deck. The thing is huge! I was thinking 24 gauge kanthal, 3.5mm ID to get 0.5 ohm dual coil. 9 or 10 wraps. Too much?

If you have the power available to get them going, then go for it.

Wee offer, if you are referring to Cpt Fredrickson who knows a certain Dick Sharpe and Pat Harper then a set of 0.4mm Fused Claptons could come your way. The cats i know who have big Tsu's like them in there....
But only if the 2 chaps can vouch for you.
 
Here's my passport photo :)
CptFrederickson_zpsb09b84b0.jpg
 
Back
Top Bottom