Blackhack
Achiever
- Joined
- Nov 7, 2013
- Messages
- 3,705
UD Tiger wire review.
Tiger wire for those who don't know is twisted ribbon wire
I got a couple of reels of Genuine UD Tiger Wire from Fasttech
(https://www.fasttech.com/p/2553200) just to test out...
Mod used : Fairy mech mod.
Atomiser used: Kayfun Monster with bell cap tank
Result : Five wraps on a 2.5mm screwdriver gave me a resistance of 0.45 Ohms and a bit of squeezing to get a nice tidy coil, wicked with a bit of Muji and the jobs a good 'un...
Fired up and a nice bright glow from the wire, used just enough cotton to pull through without snagging, put it all together and let the juice flow though the channels for a couple of minutes...couple of tokes without firing the mod to make sure the wick was saturated and fired the button and..BINGO !! A cracking vape...I actually found subtleties to Mr Manabush's Powwow that I've missed in the past....
It seems to run hotter than "Normal" wire and as It was a loosely wound coil there was no messing about getting it "Tidy"
The only downside to this is that it tends to drink the juice, I had to fill the tank three times yesterday. (and still using other tanks in rotation ??)
All in all a little something different...Not the cheapest of wires, but something to experiment with....
![20150710_112803_zpsbrmdrqco.jpg](http://[URL="http://s172.photobucket.com/user/Floki_Skutilsvein/media/20150710_112803_zpsbrmdrqco.jpg.html"][IMG]http://i172.photobucket.com/albums/w30/Floki_Skutilsvein/20150710_112803_zpsbrmdrqco.jpg)
[/URL][/IMG]
Tiger wire for those who don't know is twisted ribbon wire
I got a couple of reels of Genuine UD Tiger Wire from Fasttech
(https://www.fasttech.com/p/2553200) just to test out...
Mod used : Fairy mech mod.
Atomiser used: Kayfun Monster with bell cap tank
Result : Five wraps on a 2.5mm screwdriver gave me a resistance of 0.45 Ohms and a bit of squeezing to get a nice tidy coil, wicked with a bit of Muji and the jobs a good 'un...
Fired up and a nice bright glow from the wire, used just enough cotton to pull through without snagging, put it all together and let the juice flow though the channels for a couple of minutes...couple of tokes without firing the mod to make sure the wick was saturated and fired the button and..BINGO !! A cracking vape...I actually found subtleties to Mr Manabush's Powwow that I've missed in the past....
It seems to run hotter than "Normal" wire and as It was a loosely wound coil there was no messing about getting it "Tidy"
The only downside to this is that it tends to drink the juice, I had to fill the tank three times yesterday. (and still using other tanks in rotation ??)
All in all a little something different...Not the cheapest of wires, but something to experiment with....
