Scuba-Matt
Achiever
- Joined
- Mar 22, 2014
- Messages
- 1,003
Eleaf IStick
Features:
Innokin MVP 2.0
Features in Brief:
Variable Voltage:
voltage can be adjusted from 3.3 – 5.0 volts in .1 volt increments.
Variable Wattage:
Wattage can be adjusted from 6.0 – 11.0 W in .5 watts increments.
Ohms meter :
Reads resistance of your atomizer/cartomizer/clearomizer.
Puff Counter:
Puff counter will record the number of puffs you have taken. Either press “P “button or “U” button 1 second to check puffs ,The Puff Counter will be cleared when the device is turned off.
Short Circuit/Atomizer Protection:
Short Circuit/Atomizer Protection protects the iTaste MVP against shorted atomizers.
Over-Discharge Protection:
The iTaste MVP monitors the battery voltage and will automatically turn off when the battery is discharged.
Battery Level Indicator:
The iTaste MVP battery capacity is displayed via green, yellow and red LED lights.
Large battery capacity:
iTaste MVP e-cigarette built-in 2600 mAh polymer Li-Ion rechargeable battery.
High compatibility 510/eGo threading
Thread fit iClear10,iClear16 ,iClear30, etc
Passthrough:
The iTaste MVP uses a built in Micro USB Port. You can recharge it with a Micro USB cable. It can also work as a pass-through for use while charging.
Built-in 3 digit display :
Digital display shows Ohms meter, Voltage /Wattage setting, number of puffs taken since last time the battery was turned off.
Features:
- 2200mAh Li-Ion Battery
- VV/VW – up to 20W and 3v – 5.5v
- OLED display
- 510-Threads
- Power on/off: Press the button for five times to turn the iStick on and off.
- 10-sec Protection: Maximum of 10 seconds per drag.
- Atomizer Short-Circuit Protection: If atomizer short-circuits, the OLED screen show “Atomizer Short”.
- Low-Voltage Protection: Once the battery is below 3.3V the OLED screen will show “Lock”, which means its time to recharge.
- Unlock the Low-voltage Protection: The iStick begins working again once it reaches 3.65V.
- Low power Alert: If the battery’s power is lower than 10%, the power symbol on the screen will flash.
- Atomizers from 1ohm to 3ohm capable
- Accurate Metering
- Pass-Thru vaping while charging
Innokin MVP 2.0
Features in Brief:
Variable Voltage:
voltage can be adjusted from 3.3 – 5.0 volts in .1 volt increments.
Variable Wattage:
Wattage can be adjusted from 6.0 – 11.0 W in .5 watts increments.
Ohms meter :
Reads resistance of your atomizer/cartomizer/clearomizer.
Puff Counter:
Puff counter will record the number of puffs you have taken. Either press “P “button or “U” button 1 second to check puffs ,The Puff Counter will be cleared when the device is turned off.
Short Circuit/Atomizer Protection:
Short Circuit/Atomizer Protection protects the iTaste MVP against shorted atomizers.
Over-Discharge Protection:
The iTaste MVP monitors the battery voltage and will automatically turn off when the battery is discharged.
Battery Level Indicator:
The iTaste MVP battery capacity is displayed via green, yellow and red LED lights.
Large battery capacity:
iTaste MVP e-cigarette built-in 2600 mAh polymer Li-Ion rechargeable battery.
High compatibility 510/eGo threading
Thread fit iClear10,iClear16 ,iClear30, etc
Passthrough:
The iTaste MVP uses a built in Micro USB Port. You can recharge it with a Micro USB cable. It can also work as a pass-through for use while charging.
Built-in 3 digit display :
Digital display shows Ohms meter, Voltage /Wattage setting, number of puffs taken since last time the battery was turned off.
