Will this Cartomizer go with this mod? HELP!

[Willyumnum]

I feel like I need to be sure, if I'm looking to spend money on this. Help!

Carto: http://altsmoke.com/dual-coil-510-stainless-steel-black-xl-carotmizer.html

Mod: http://www.myvaporstore.com/SMOKTech_Magneto_Brass_V2NL_p/smok-brnl.htm

 

[breakbystealth]

Not sure that would work but i could be wrong. your best off with a rebuildable atomizer for that to be fair. some thing more like this

http://altsmoke.com/rsst-genesis-atomizer.html

 

[the jester]

bit more homework needed on this bud...yes the carto will fit as the magneto is 510 threaded...but you wouldnt just stick a carto on really...look for a nice carto tank to put ss carts in and that will work so much better then ....or a nice silica tank like the fogger or taifun

 

[whit77]

a carto tank to put the carto in
edit: what the jester said

 

[the jester]

this is what you want....all from same vendor....

http://www.ltecigs.larsentilbrook.co.uk/index.php?route=product/product&path=59_115&product_id=1351

http://www.ltecigs.larsentilbrook.co.uk/index.php?route=product/product&path=60_123&product_id=1347

http://www.ltecigs.larsentilbrook.co.uk/index.php?route=product/product&path=133&product_id=1175

http://www.ltecigs.larsentilbrook.co.uk/index.php?route=product/product&path=133&product_id=1173




spending your money wisely first will save money in the future

 

[u8myufo]

this is what you want....all from same vendor....

http://www.ltecigs.larsentilbrook.co.uk/index.php?route=product/product&path=59_115&product_id=1351

http://www.ltecigs.larsentilbrook.co.uk/index.php?route=product/product&path=60_123&product_id=1347

http://www.ltecigs.larsentilbrook.co.uk/index.php?route=product/product&path=133&product_id=1175

http://www.ltecigs.larsentilbrook.co.uk/index.php?route=product/product&path=133&product_id=1173




spending your money wisely first will save money in the future

And perhaps a ohms tester http://www.stealthvape.co.uk/BLUE-LED-OHM-METER-BOX

 

[the jester]

And perhaps a ohms tester http://www.stealthvape.co.uk/BLUE-LED-OHM-METER-BOX

good point but i use the stealth vape pre made wire at 1.8 ohms and is working well for me, although i still do check them on my ohms meter...just a thought

 

[Willyumnum]

this is what you want....all from same vendor....

http://www.ltecigs.larsentilbrook.co.uk/index.php?route=product/product&path=59_115&product_id=1351

http://www.ltecigs.larsentilbrook.co.uk/index.php?route=product/product&path=60_123&product_id=1347

http://www.ltecigs.larsentilbrook.co.uk/index.php?route=product/product&path=133&product_id=1175

http://www.ltecigs.larsentilbrook.co.uk/index.php?route=product/product&path=133&product_id=1173




spending your money wisely first will save money in the future

Why do if want that?

 

[the jester]

personally that would be by far the better choice of mod...if you want to use cartos like your post stated then id suggest using them in a tank....but if you want to buy the magneto...and then use carts screwed into the mod then yes..as your post asked...they will fit fine

 

[Motorheaded]

And perhaps a ohms tester http://www.stealthvape.co.uk/BLUE-LED-OHM-METER-BOX

I didn't check the links first. and thought "A coil checker for cartos? You after getting it through the classies?" LOL
Forgive me, I'm a Manc!