escape2vapour
Postman
- Joined
- Jun 8, 2015
- Messages
- 120
Wotofo Conqueror RTA - £24.99-£26.50
The Wotofo Conqueror RTA is a postless tank atomizer, with lead holes on the deck itself. This interesting concept was seen before in the Hannya RDA by Blitz Enterprises, but this is the first RTA to incorporate this deck style. You will notice the vertical grub screws on the bottom of the base, to hold the leads and two airflow holes front and center.
The Conqueror’s leak-resistant design goes further with excellent machining and fit. The tank comes apart except for the juice control section at the top, and glass tank section. The glass is inset in a protective outer sleeve with a window on each side that is big enough to see your juice reserve. The Wotofo Conqueror is a top-fill tank with a carefully and efficiently designed airflow system for a perfect balance.
PEEK insulators for the positive posts help thermoregulation when building complex coils. Five 2 mm holes are fully adjustable via AFC ring on the bottom of the tank. An adjustable 510 pin allows you to use mechanicals with ease, even hybrids. The ease of use building on this deck cannot be overstated. Just plug your leads into the deck holes and off you go.
Setup for dual coils, this RTA can deal with complex builds. To tighten the leads down, there are grub screws that are vertically lined up with the bottom of the deck.
The Conqueror RTA’s juice control works similar to the new Svoe Mesto Kayfun Mini V3, with a thread-based valve that runs around the deck. Each order includes one Wotofo Conqueror RTA, a pack of pre-built Comp wires, Allen key, replacement grub screws, o-rings and a pad of organic cotton to get started. Imported.
Features include:
The Wotofo Conqueror RTA is a postless tank atomizer, with lead holes on the deck itself. This interesting concept was seen before in the Hannya RDA by Blitz Enterprises, but this is the first RTA to incorporate this deck style. You will notice the vertical grub screws on the bottom of the base, to hold the leads and two airflow holes front and center.
The Conqueror’s leak-resistant design goes further with excellent machining and fit. The tank comes apart except for the juice control section at the top, and glass tank section. The glass is inset in a protective outer sleeve with a window on each side that is big enough to see your juice reserve. The Wotofo Conqueror is a top-fill tank with a carefully and efficiently designed airflow system for a perfect balance.
PEEK insulators for the positive posts help thermoregulation when building complex coils. Five 2 mm holes are fully adjustable via AFC ring on the bottom of the tank. An adjustable 510 pin allows you to use mechanicals with ease, even hybrids. The ease of use building on this deck cannot be overstated. Just plug your leads into the deck holes and off you go.
Setup for dual coils, this RTA can deal with complex builds. To tighten the leads down, there are grub screws that are vertically lined up with the bottom of the deck.
The Conqueror RTA’s juice control works similar to the new Svoe Mesto Kayfun Mini V3, with a thread-based valve that runs around the deck. Each order includes one Wotofo Conqueror RTA, a pack of pre-built Comp wires, Allen key, replacement grub screws, o-rings and a pad of organic cotton to get started. Imported.
Features include:
- Built by Wotofo
- 22mm diameter
- Full SS304 construction
- Post-less design with room for single or dual builds
- 5 x 2 mm airflow holes on each side for a total of 2 mm of open airflow
- PEEK insulators for positive post
- Adjustable brass-plated 510 pin
- Top-fill
- Kayfun mini-style juice control
- Fits 510 drip tips
- 4ml juice capacity
- One Wotofo Conqueror Postless RTA
- One Spare Part and Hex Key Pack
- Japanese Organic Cotton
- Pack of Wotofo Comp Wire
