WotofoOfficial
Postman
- Joined
- Jul 26, 2018
- Messages
- 239
Hey guys,
You shall have hearning or using our Profile RDA, let we introduce our mesh RTA this time.
Profile Unity RTA!
What innovations did we make this time?
1. Deck-chamber linkage system
The deck follows the chamber always, which makes the deck always follow the chamber when turning the atomizer.
Why the following? Because we found that when a person screws the vaporization chamber onto the deck, he/she might have different feel of tightness, so finally they have different air directions to the mesh. We don’t want any little negative impact in your flavor feast, so it’s best to kill such little possibilities in the beginning, and make the deck and the chamber linked at the best position throughout. With this solution, flavor experience for each individual person becomes much closer to what we designed.
2. It’s The Enemy Of Burnt Taste.
Burnt taste happens mostly when the liquid is poorly got past to the coil.
But look how’s the liquid flow system on the Profile Unity RTA work. It starts from the two long refill slots which are no difference than most top filling tanks on the market. Then the e-liquid, through two smaller-sized slots, gets into the interspace between the vaporization chamber wall and the atomizer wall. That’s where juice gets distributed. Juice will be directed right to the wick on its side top, as well as bottom, thus speeds up the feeding process with non-stop flow by the shortest path.
We also make few small changes.
1. Profile Unity RTA's drip tip is still made of resin kept the 810 connection standard,. It is nearly 2 times thicker than our previous drip tip, but the center passage is smaller and has a gradual reduction in diameter downwards. The thickness is for consideration of heat dissipation and comfort, allowing the drip tip to snugly fit between your lips, while the center passage design facilitates flavor delivery.
2. Equipped with OFRF nexMESH coil. Last year, a brand called OFRF launched their mesh product that can flawlessly fit in our Profile RDA build deck. As the Profile mesh RTA project was settled, we met with the OFRF team and reached the agreement to incorporate their nexMESH into our new product. The nexMESH is also made from Kanthal A1 with resistance of 0.13ohm (performs best at 60 to 70W), adopting triple dense weaving tech to have more contact area with e-liquid.
As the slogan said "Phenomenal Flavor Production, All Tastes Locked In!"
Welcome to share your thoughts or question about Profile Unity RTA here guys.
We may reply a little later considering of different time zone, but we‘re always here.
You shall have hearning or using our Profile RDA, let we introduce our mesh RTA this time.
Profile Unity RTA!
What innovations did we make this time?
1. Deck-chamber linkage system
The deck follows the chamber always, which makes the deck always follow the chamber when turning the atomizer.
Why the following? Because we found that when a person screws the vaporization chamber onto the deck, he/she might have different feel of tightness, so finally they have different air directions to the mesh. We don’t want any little negative impact in your flavor feast, so it’s best to kill such little possibilities in the beginning, and make the deck and the chamber linked at the best position throughout. With this solution, flavor experience for each individual person becomes much closer to what we designed.
2. It’s The Enemy Of Burnt Taste.
Burnt taste happens mostly when the liquid is poorly got past to the coil.
But look how’s the liquid flow system on the Profile Unity RTA work. It starts from the two long refill slots which are no difference than most top filling tanks on the market. Then the e-liquid, through two smaller-sized slots, gets into the interspace between the vaporization chamber wall and the atomizer wall. That’s where juice gets distributed. Juice will be directed right to the wick on its side top, as well as bottom, thus speeds up the feeding process with non-stop flow by the shortest path.
We also make few small changes.
1. Profile Unity RTA's drip tip is still made of resin kept the 810 connection standard,. It is nearly 2 times thicker than our previous drip tip, but the center passage is smaller and has a gradual reduction in diameter downwards. The thickness is for consideration of heat dissipation and comfort, allowing the drip tip to snugly fit between your lips, while the center passage design facilitates flavor delivery.
2. Equipped with OFRF nexMESH coil. Last year, a brand called OFRF launched their mesh product that can flawlessly fit in our Profile RDA build deck. As the Profile mesh RTA project was settled, we met with the OFRF team and reached the agreement to incorporate their nexMESH into our new product. The nexMESH is also made from Kanthal A1 with resistance of 0.13ohm (performs best at 60 to 70W), adopting triple dense weaving tech to have more contact area with e-liquid.
As the slogan said "Phenomenal Flavor Production, All Tastes Locked In!"
Welcome to share your thoughts or question about Profile Unity RTA here guys.
We may reply a little later considering of different time zone, but we‘re always here.
