AGA T2 Wick Wire and Mesh

[MightyMouth]

Hi again all,

So I am about to order an AGA T2 and I want to order some supplies to go with but I don't know what I need. I would like to be able to try both Silica and Mesh Wicks to see which I prefer and I need some wire. Suggestions to get started please.

Thanks

 

[AndyC1971]

Wire: -

http://marketplace.planetofthevapes.co.uk/nichrome-rebuildable-atomizer-resistance-wire

Wick: -

http://marketplace.planetofthevapes.co.uk/Rebuildables/rebuildable-atomizer-silica-wick

Mesh: -

http://marketplace.planetofthevapes...ies/rebuildable-atomizer-stainless-steel-mesh

Grade 400 is the best

Oh and for good measure!!: -

http://marketplace.planetofthevapes.co.uk/Rebuildables/Aga-T-V2

The only thing needed, is good patience, but when you get it right, its truly an experience to behold, and the sense of achievement is high

 

[MightyMouth]

Thanks, so all of those sizes work with the aga t2? I am using a vamo does that have any bearing on which size wick or wire I use?

 

[AndyC1971]

Thanks, so all of those sizes work with the aga t2? I am using a vamo does that have any bearing on which size wick or wire I use?

No mate, all of that will work on a Vamo, because that is what I used on mine

Just make sure you watch a couple of tutorials, and make sure the resistance is over 1.2 ohms or it wont work, and when wicking with SS, oxidise, oxidise and then......oxidise.

oops misread slightly. 2mm silica and 0.2 wire is what I use

 

[MightyMouth]

Okay thanks that's the info I was looking for.