katmint
Postman
- Joined
- Dec 19, 2014
- Messages
- 68
Hi guys
Got a small budget to play with for this one.
I'm trying to do away with my clones but the hardest ones to replace are my Taifun GT (1) clones. I have a Subtank for lung hits but obviously it eats the juice.
I am wanting to find a tank that ideally in a perfect world would do a fairly narrow draw (comparable to the Taifun) for mouth to lung use. Ideally it would also open wide for lung hits when I want that (and without having to take it apart like my Fogger 4.1 that is still a bit tight on the draw for open lung hits). If I absolutely had to pick one method it would be mouth to lung with a little resistance for this buy, as I have the Subtank for open lung hits. I would also prefer not to have to screw fill but that's flexible for the right tank.
First I looked at the Fogger 6, seeing as the 4.1 got *close* to what I wanted. However the 4.1 is a quite restrictive lung hit and the airflow control doesn't seem any better in the 6. I could deal with its issues if the MTL was good/narrow enough and the lung hit was more open than the 4.1/5?
So far I've been recommended the Lemo but users say it's still quite open and airy on the MTLs and also it has two big negatives - screw filling (and not just screw filling but having to remove part of the base), and it being 23mm, as I want it flush as poss on my M80. Also hate the top cap look like the Kayfun "top hat". Others say the Billow but again it's tools for the airflow and I have no clue if it's another screw fill? I also don't know whether it would flood with a tighter draw?
Another choice would be the Expromizer but despite someone telling me I can get one new for £30 I've yet to find one for that, and that is my absolute max including postage. This one ticked a lot of boxes for me but £50 puts it out of my range.
Has anyone got any other suggestions for me to look at? I hate having such a small budget but that's the way it is sadly. Thanks xx
Got a small budget to play with for this one.
I'm trying to do away with my clones but the hardest ones to replace are my Taifun GT (1) clones. I have a Subtank for lung hits but obviously it eats the juice.
I am wanting to find a tank that ideally in a perfect world would do a fairly narrow draw (comparable to the Taifun) for mouth to lung use. Ideally it would also open wide for lung hits when I want that (and without having to take it apart like my Fogger 4.1 that is still a bit tight on the draw for open lung hits). If I absolutely had to pick one method it would be mouth to lung with a little resistance for this buy, as I have the Subtank for open lung hits. I would also prefer not to have to screw fill but that's flexible for the right tank.
First I looked at the Fogger 6, seeing as the 4.1 got *close* to what I wanted. However the 4.1 is a quite restrictive lung hit and the airflow control doesn't seem any better in the 6. I could deal with its issues if the MTL was good/narrow enough and the lung hit was more open than the 4.1/5?
So far I've been recommended the Lemo but users say it's still quite open and airy on the MTLs and also it has two big negatives - screw filling (and not just screw filling but having to remove part of the base), and it being 23mm, as I want it flush as poss on my M80. Also hate the top cap look like the Kayfun "top hat". Others say the Billow but again it's tools for the airflow and I have no clue if it's another screw fill? I also don't know whether it would flood with a tighter draw?
Another choice would be the Expromizer but despite someone telling me I can get one new for £30 I've yet to find one for that, and that is my absolute max including postage. This one ticked a lot of boxes for me but £50 puts it out of my range.
Has anyone got any other suggestions for me to look at? I hate having such a small budget but that's the way it is sadly. Thanks xx
