What's new

Best Dripping Atomiser For Cheap

dalk1210

Postman
Joined
Sep 9, 2013
Messages
196
Hi looking a dripper something cheap but solid . Loads on FastTech and the Igo-L and Igo W look good for the dough . Any others worth getting ?
 
Hi dalk1210,

I was in exactly the same place you are a week ago, so I'll pass on the help I got. I've ended up with an Igo-L - inexpensive, relatively straightforward, and available from UK stockists so you won't have to wait for FT. I would also urge you to get some wick and wire at the same time - you get a little bit with the dripper, but really only enough for one setup. Be prepared to tinker - there are a lot of variables and different ways to set up a dripper. I've had mine a week and have now made five different coil and wick setups.
Anyway, have a look through this thread for more info. Good luck!

http://www.planetofthevapes.co.uk/forums/showthread.php/25839-Time-to-try-dripping
 
If you're not fussed about dual and quad coiled cloud-chasing setups then the A7 is a great choice from pink mule. About 10 quid plus delivery Fantastic airflow right from under the coil. Gives a great vape with both silica and micro coiled with cotton
 
My first RDA was the IGO-W. Actually, I am not that impressed with it.. The main things I don't like about it is the screws. Ok, the holes in the posts are nice, but if you're not careful, tightening the screws will snap the kanthal wires. Apparently, this is a known issue. Also the diameter of the IGO-W is smaller than my MODS which are 22mm, which is a bit of a shame.. Also, it does not come with a drip tip..
 
I got an IGO-L for my first dripper, cost me about 10/12 wuid delivered, and after mastering it with cotton and drilling the air hole to 2mm, its probably the best flavour I get out of any of my attys (Taifun GT included)

It was recommended by T-Max (Snake oil vendor) and I am glad I got it. Took me a while to get it spot on though to be honest, but after trying 1001 different coils, I have settled for a "tricro "coil with cotton (Search on youtube for tutorial) its not as daunting as it looks to make, and the air hole makes a HUUUUGEEEE difference when drilled.

Also remember when using a dripper, drop your nic mg as it will blow your head off if its too high ( I usually use 12, and had to drop to 6 on my IGO)
 
My first drippers were a Yoda SS and and IGO -W I prefer the IGO-W as it has the option of multicoils but can be used for a single coil to begin with and is pretty cheap.
 
Back
Top Bottom