Blaze solo and liquid in mouth .

[johnphilip]

Just got the Blaze solo , I can't vape a 0.2 coil I use 0.6 coils. As a rule on my other devices used the joyetech penguin for years
I fitted a 0.6 coil into the Blaze solo set my mod to about 16 - 20 watts .
Followed YouTube videos on wicking the coil .
Got liquid in my mouth straight away , I make my own liquid. Peanut butter 50/50 . It is quite a dark liquid. But works OK on my other device .
My Mod is a few. Years old now , uses. 2 , of 18650 batteries was wondering if the coil was not heating up fast enough .
The coil is a 26 g and 32 g , ID 3mm at 0.6 ohms
Thanks for reading

 

[Gitchy]

Flooding can be down to a few things mate. It's usually wicking I find, but you might want to try upping the wattage to vapourise more of the liquid. Could also be that the liquid you're using is too thin for the tank and a 60/40 or 70/30 might suit it better.

Try focusing on the wicking first by using a wee bit more cotton and then try the other things after if that's not sorting it out.