The title says it all really which leaves me somewhat confused. Due to the amount of 18mg 50/50 liquid that's been around since I first moved to vaping over 10 years ago, I find it hard to believe that I'm the only one vaping this type of liquid at 60w rather than say 15-18w and can find so little information on a suitable device that doesn't leak.
My latest purchase was an Smok RPM 5 with a 0.15 coil. But I still have an IXP80, and an Ageis Solo, and before that an Ageis Legend with a Uwell Crown. And I'm not sure at what point I've gone wrong but I've ended up in sticky position constantly dealing with leaks.
I have a mixture of coils; RPM 0.6, RPM80 0.17, RPM2 0.16, and the RPM3 0.15.
I used to enjoy the Firestarter 50/50 18mg fruity menthol flavours but my local doesn't stock it any more. So I moved over to Frakenvapes 50/50 18mg. I tried V4 Salts for a while and whilst this seemed ok, I can't fully recall the leaking situation, but I stopped using it as I suspected that it was giving me a slight issue with my gums.
The RPM 5 with the 0.15 is great at 60w with the air hole open roughly 20%. Lovely throat hit! I use it maybe once or twice an hour, sometimes less, but it never leaves me longing for more. However, it's constantly leaking into where the pods sits, and eventually this seems to result in liquid around the bottom of the pod whilst the pod is connected to the device. So liquid on the outside of the pod at the bottom which I'm guessing has flowed upwards. And it drives me absolutely insane.
After doing a considerable amount of reading, the liquid I'm using is too thin for both the coil and the amount of watts I'm using. I tried lower strength but thicker nicotine years ago and I was using the device much more than I wanted and was always left wanting more. I've tried vaping at the prescribed 15-18w with the air hole in various positions but that is far from adequate. And whilst I'm reading I don't seem to be coming anything recommended other than thicker liquid at a lower strength, or reducing the watts. And when I do either of those things I'm left wanting more.
So if you're happily puffing away at around 60 watts with 50/50 18mg liquid, and don't suffer from liquid leaking all over the place, I would really appreciate it if you could share which device, tank, and coil you are using please.
I've recently stumbled across the Vapefly Brunhilde RTA - liquid flow control sounds very appealing! But I'm not sure if that feature is a gimmick, and RTA is a rabbit hole based on what I need. I'd prefer to keep things as simple in ideal world if possible.
Once upon a time I was a 20+ per day Regal Kingsize smoker which I throughly enjoyed for 20+ years until I decided that I'd try and move to something less harmful that I still enjoyed whilst fulfilling my cravings from nicotine and staying sane. And whilst the RPM 5 hits the spot, there has to be a better 'leak proof' solution.
My latest purchase was an Smok RPM 5 with a 0.15 coil. But I still have an IXP80, and an Ageis Solo, and before that an Ageis Legend with a Uwell Crown. And I'm not sure at what point I've gone wrong but I've ended up in sticky position constantly dealing with leaks.
I have a mixture of coils; RPM 0.6, RPM80 0.17, RPM2 0.16, and the RPM3 0.15.
I used to enjoy the Firestarter 50/50 18mg fruity menthol flavours but my local doesn't stock it any more. So I moved over to Frakenvapes 50/50 18mg. I tried V4 Salts for a while and whilst this seemed ok, I can't fully recall the leaking situation, but I stopped using it as I suspected that it was giving me a slight issue with my gums.
The RPM 5 with the 0.15 is great at 60w with the air hole open roughly 20%. Lovely throat hit! I use it maybe once or twice an hour, sometimes less, but it never leaves me longing for more. However, it's constantly leaking into where the pods sits, and eventually this seems to result in liquid around the bottom of the pod whilst the pod is connected to the device. So liquid on the outside of the pod at the bottom which I'm guessing has flowed upwards. And it drives me absolutely insane.
After doing a considerable amount of reading, the liquid I'm using is too thin for both the coil and the amount of watts I'm using. I tried lower strength but thicker nicotine years ago and I was using the device much more than I wanted and was always left wanting more. I've tried vaping at the prescribed 15-18w with the air hole in various positions but that is far from adequate. And whilst I'm reading I don't seem to be coming anything recommended other than thicker liquid at a lower strength, or reducing the watts. And when I do either of those things I'm left wanting more.
So if you're happily puffing away at around 60 watts with 50/50 18mg liquid, and don't suffer from liquid leaking all over the place, I would really appreciate it if you could share which device, tank, and coil you are using please.
I've recently stumbled across the Vapefly Brunhilde RTA - liquid flow control sounds very appealing! But I'm not sure if that feature is a gimmick, and RTA is a rabbit hole based on what I need. I'd prefer to keep things as simple in ideal world if possible.
Once upon a time I was a 20+ per day Regal Kingsize smoker which I throughly enjoyed for 20+ years until I decided that I'd try and move to something less harmful that I still enjoyed whilst fulfilling my cravings from nicotine and staying sane. And whilst the RPM 5 hits the spot, there has to be a better 'leak proof' solution.