DNA 200 Setup

[Nathan]

I've done it on escribe and saved changes but it doesn't work. I was wondering if you guys done it some other way.

 

[andysri]

@Nathan Did you press upload to device after saving? You need to do this if you didn't mate

 

[s3rv3d]

As said above from the screen section and upload to device.

 

[Nathan]

Yep done that, and I've done it again about 20mins ago just to make sure and it keeps giving me the battery with the lightening bolt through it, no actual numbered %.

 

[s3rv3d]

Yep done that, and I've done it again about 20mins ago just to make sure and it keeps giving me the battery with the lightening bolt through it, no actual numbered %.

Which line are you trying to replace it on. I replaced the Temp line (default bottom). So I have ohms, volts and % on lines 1-3. I still have the battery bar on the left also.

 

[mdhardy01]

Yep done that, and I've done it again about 20mins ago just to make sure and it keeps giving me the battery with the lightening bolt through it, no actual numbered %.

Are you trying to get it to show on the secondary charging screen?

 

[Nathan]

Are you trying to get it to show on the secondary charging screen?

What secondary charging screen, i only thought there was one charge screen, the screen that comes on when you plug it in to charge.

 

[mdhardy01]

What secondary charging screen, i only thought there was one charge screen, the screen that comes on when you plug it in to charge.

In escribe?

 

[TruckinVaper]

What secondary charging screen, i only thought there was one charge screen, the screen that comes on when you plug it in to charge.

Sounds like you need to adjust the brightness of the charging screen, I think it defaults to 0%. When you first plug the USB in it will show the standard screen, the secondary screen comes up once it's gone to sleep but only if you turn the brightness up for it.

 

[Tubbyengineer]

What secondary charging screen, i only thought there was one charge screen, the screen that comes on when you plug it in to charge.

The charging screen only comes on when the mod goes to sleep, you'll need to set it's brightness to >25% for it to be visible...