dna40 / modmaker small boy enclosure

[GoWo]

abs sheet came in the post this morning, I've just cut an inner cover & I'm about .5mm out on the top edge , I should be tooting on this this avo , also need to find some screws m1.5 x 10mm 'ish

 

[GoWo]

99.9% done , just waiting for screws & magnets

 

["Misfit"]

Nice work
I know the box is from modmaker
is the rest 3D printed

 

[GoWo]

Nice work
I know the box is from modmaker
is the rest 3D printed

Yeah , a 3d printed tray for all the bits to go in, a 3d printed carrier for the screen that slots into the tray, the inner cover with the up/down buttons is bought , I cant remember the proper name but its a textured abs sheet that I cut on the cnc. All design done in Fusion 360 toolpaths done in another program.

 

[GoWo]

The "Gutz"

 

[GoWo]

Well , I've been using this almost a week & although I made a few mistakes ( an extra fire button hole on the wrong side & an extra hole at the bottom inner cover fixing in the wrong place) I think it came out pretty well considering its been a couple of years since the last mod I made .

 

[Astral]

I've always wanted to make my own mod, I take my hat off to you. That's very nicely done.

 

[GoWo]

I've always wanted to make my own mod, I take my hat off to you. That's very nicely done.

You should have a go and if its just for yourself don't put any pressure on yourself , like everything else you get better with practice , I made a few mistakes on this , but I still like it

 

[GoWo]

I wanted it to be as minimalist as poss on the outside , but I've had a go at lasering the inside of the lid , I've not centred it properly though , doh , although I'm happy with the quality of it , it really is finished now & I use it every day .

 

[pixelhazard]

Awesome!