What's new

Epoch D1 everyone should have one, why?

angelfiremods

Postman
Joined
May 26, 2015
Messages
83
Every now and again a product comes out which does not hit the shelves of every vendor, does not have the hype surrounding it that some of the bigger products have, yet simply put - are amazing! It's when this happens that we feel the need to share it, we want to tell everyone 'buy one, you'll love it', unfortunatley though as a vendor it can be seen that we are just trying to make another sale, however, I can promise that this is an honest share. The product we want to tell you about today is the EHPro Epoch D1. If you are in the market for an RTA then likely advice from the crowd will be 'buy a Lemo 2' or 'buy a Billow 2', 'a Goblin'. Okay, every one has different preferences for vaping but I can honestly say this seems to win on all levels, but why?

The Epoch D1 is great for all, it is forgiving in its design meaning less experienced vapers can use it and build it without the complications or challenges that other tanks present but whether experienced, not experienced or somewhere inbetween this tank delivers BAGS of FLAVOUR and the vape is magnificent!

It's forgiving and flexible because of its designs which you will see in the independent videos I have linked below. Effectively, if your build isn't perfect, the airflow and juiceflow control means you can configure it to combat bad wicking and prevent dry hits. This is down to the external juice flow control and the airflow which can be set wide open (comparable to Lemo 2 airflow) or closed / shut, allowing even a badly wicked coil to absorb liquid when drawing through the mouthpiece.

There is no whistle, no gurgling (as long as you don't over fill and close the juice flow when filling), no horrible noises as you vape, the set up is done so well that the only noise when vaping I would compare to being a car enthusiast and listening to your favourite V8 tuned to its best - it sounds fantastic (odd yes, but true).

There are bags of new innovations in this atomizer, this is just a very simple overview of my thoughts having used one for a number of weeks now and wanting to share it. To show how good I think it is, (other vendors will think I am mad) despite slow sales I have ordered more, only because at some point the secret will get out, the hype will climb and everyone will want one!

What are the features:

- Top fill when juice flow is closed
- External Juice Flow Control
- External Air Flow Control
- 2.5ml tank (looks great and takes seconds to fill and also 5ml extension coming)
- Innovative deck and wicking system - super easy to work with
- Visable juice flow system and juice level
- Delrin mouthpiece and Delrin Drip Tip Adaptor
- Breaks down completely so that you can wash every single component
- The best vape on a tank yet (IMO)
- The best flavour on a tank yet (IMO)
- Some will love the look, some won't (to be fair)
- Dual Coil Design (Off set)
- Copper contact screw
- RDA style deck
- 22mm diameter
- This think struggles to leak (yes a good thing)

So if I can't convince you I hope you'll watch these reviews, and when you have some money to invest on a tank consider it, it will be the best decision you make especially considering it is only £27.99 and with POTV10 code only £25.19 before delivery.





11270707_1633084443579064_683951602822625369_o.jpg

11270406_1633084423579066_7386664355782075495_o.jpg
 
Last edited by a moderator:
I can't speak highly enough about this RTA. The flavour and density of vapour it produces has to be experienced to be believed. Building on the deck is a joy with the offset airholes, the wicking system is just genius, the juice control system works a treat, the provided drip tip is so good I haven't even used the drip tip adaptor, piece of cake to fill and it is so quiet when vaping compared to other tanks. I really hope that future tanks adopt some of the design features of this atomiser otherwise they will feel like a step backwards. A brilliant RTA, seriously.
 
Every now and again a product comes out which does not hit the shelves of every vendor, does not have the hype surrounding it that some of the bigger products have, yet simply put - are amazing! It's when this happens that we feel the need to share it, we want to tell everyone 'buy one, you'll love it', unfortunatley though as a vendor it can be seen that we are just trying to make another sale, however, I can promise that this is an honest share. The product we want to tell you about today is the EHPro Epoch D1. If you are in the market for an RTA then likely advice from the crowd will be 'buy a Lemo 2' or 'buy a Billow 2', 'a Goblin'. Okay, every one has different preferences for vaping but I can honestly say this seems to win on all levels, but why?

The Epoch D1 is great for all, it is forgiving in its design meaning less experienced vapers can use it and build it without the complications or challenges that other tanks present but whether experienced, not experienced or somewhere inbetween this tank delivers BAGS of FLAVOUR and the vape is magnificent!

It's forgiving and flexible because of its designs which you will see in the independent videos I have linked below. Effectively, if your build isn't perfect, the airflow and juiceflow control means you can configure it to combat bad wicking and prevent dry hits. This is down to the external juice flow control and the airflow which can be set wide open (comparable to Lemo 2 airflow) or closed / shut, allowing even a badly wicked coil to absorb liquid when drawing through the mouthpiece.

There is no whistle, no gurgling (as long as you don't over fill and close the juice flow when filling), no horrible noises as you vape, the set up is done so well that the only noise when vaping I would compare to being a car enthusiast and listening to your favourite V8 tuned to its best - it sounds fantastic (odd yes, but true).

There are bags of new innovations in this atomizer, this is just a very simple overview of my thoughts having used one for a number of weeks now and wanting to share it. To show how good I think it is, (other vendors will think I am mad) despite slow sales I have ordered more, only because at some point the secret will get out, the hype will climb and everyone will want one!

What are the features:

- Top fill when juice flow is closed
- External Juice Flow Control
- External Air Flow Control
- 2.5ml tank (looks great and takes seconds to fill and also 5ml extension coming)
- Innovative deck and wicking system - super easy to work with
- Visable juice flow system and juice level
- Delrin mouthpiece and Delrin Drip Tip Adaptor
- Breaks down completely so that you can wash every single component
- The best vape on a tank yet (IMO)
- The best flavour on a tank yet (IMO)
- Some will love the look, some won't (to be fair)
- Dual Coil Design (Off set)
- Copper contact screw
- RDA style deck
- 22mm diameter
- This think struggles to leak (yes a good thing)

So if I can't convince you I hope you'll watch these reviews, and when you have some money to invest on a tank consider it, it will be the best decision you make especially considering it is only £27.99 and with POTV10 code only £25.19 before delivery.





View attachment 53991

View attachment 53992


Gonna be stocking the s1 also?
 
Last edited by a moderator:
What's the eta on the 5ml extension, do you know? Because until then, a 2.5mltank? Well... Other than that - sounds great ;)
 
We will be stocking the S1 there is no ETA on the extension tank at the moment unfortunately.
 
I can't speak highly enough about this RTA. The flavour and density of vapour it produces has to be experienced to be believed. Building on the deck is a joy with the offset airholes, the wicking system is just genius, the juice control system works a treat, the provided drip tip is so good I haven't even used the drip tip adaptor, piece of cake to fill and it is so quiet when vaping compared to other tanks. I really hope that future tanks adopt some of the design features of this atomiser otherwise they will feel like a step backwards. A brilliant RTA, seriously.

Damn you! I just ordered another tank I don't really need!!

Is it possible to get to the build deck without emptying the tank?
 
Damn you! I just ordered another tank I don't really need!!

Is it possible to get to the build deck without emptying the tank?

But you do really need this tank. :D

It is possible to get to the build deck without emptying the tank but it's not ideally set up for it due to the way the top cap locks onto the chimney. The chimney will come off with the tank section. It only holds 2.5 ml of juice though, so you don't lose much or have to wait too long if you want to get at the deck. I don't mind the 2.5 ml capacity because filling it is a breeze - screw chimney down, pop the drip cap off, fill, cap on, raise chimney and your off.

One thing I'll say about this tank is, proceed with caution when taking it apart/putting it back together until you become familiar with it. The threads are absolutely fine on it, so if (like me) you have any difficulty it's because you're not yet familiar with how it likes things done. For instance, the chimney has to push over an 0-ring before threading and it takes a little practice before discovering exactly how to do it. If you feel any part isn't going on smoothly, back off and start again rather than pushing through. Once you get the hang of it it's all buttery smooth.

Good luck, I look forward to hearing what you think of it.
 
But you do really need this tank. :D

It is possible to get to the build deck without emptying the tank but it's not ideally set up for it due to the way the top cap locks onto the chimney. The chimney will come off with the tank section. It only holds 2.5 ml of juice though, so you don't lose much or have to wait too long if you want to get at the deck. I don't mind the 2.5 ml capacity because filling it is a breeze - screw chimney down, pop the drip cap off, fill, cap on, raise chimney and your off.

One thing I'll say about this tank is, proceed with caution when taking it apart/putting it back together until you become familiar with it. The threads are absolutely fine on it, so if (like me) you have any difficulty it's because you're not yet familiar with how it likes things done. For instance, the chimney has to push over an 0-ring before threading and it takes a little practice before discovering exactly how to do it. If you feel any part isn't going on smoothly, back off and start again rather than pushing through. Once you get the hang of it it's all buttery smooth.

Good luck, I look forward to hearing what you think of it.

Thanks mate. Will let you know how I get on.
 
Been waiting quite a while for someone to stock this. Ticks a lot of boxes. Is nice to see a full range of features implemented in a user friendly design.

IMO they have combined the best features of whats about and refined them. Good stuff.

It seems ehpro have been doing some market research and listening.

Shame now its available I cant afford it!
 
Sounds very interesting, what is the cap made of?
Skint but looking forward to some more feedback on this.
 
Back
Top Bottom