Fogger V2 question?

[TomVa-ping]

Hi Guys and Gals

My fogger is being a little temper mental

If i have a few good toots on it the third is allmost a dry hit so i blow down the tip and then the flavour returns

any ideas??

regards T

 

[robteifi]

Are you using the o-ring that fits under the chimney? That can often choke the wicks. If you're not then you may have too much wicking material in the slots.

 

[Ninjaassasin1983]

what you using for wick buddy?

 

[TomVa-ping]

Organic cotton wool

I have to admit this time i recoiled it i made the wick less dense

O ring under the chimney????

 

[robteifi]

When you first got the fogger there would have been a white(ish) o-ring above the included mesh wick (assuming it came supplied with a wick). Most of us just discard it.

Try putting a couple of small balls of cotton wool under the wick where it comes in through the slots, that will help with wicking in my experience.

You can also improve wicking by changing the way you vape a bit - try drawing on the fogger before you press the button and keep drawing on it after you release the button, that should draw more juice into the chamber.

 

[Dirty Dog]

hi trell good tip from robteifi about the small bits of cotton wool under the main wick, this helps 'mop up' any excess juice if your Fogger is over wicking. If you are still getting dry hits after reducing the density of your main wick try unscrewing the chimney half a turn, it will allow more juice through to the wick, it sort of acts like a juice control. Just realized that, with the exception of Ninjaassasin, this is a completely Welsh thread, Cymru am byth.

 

[TomVa-ping]

Cymru am byth indeed.

I will try the sudgestion

Diolch!