Frankenstein's vape

[Th3G00dC00k]

Hi all let me preface; I have absolutely no training, and am a complete novice! I don't know terminology, and am picking things up as I go along. So here's the plan, I'm gonna take an EVOLV DNA60 as the base, utilize that battery housing to equip an 18650 battery, then using the scrap pieces from the disassembled vape, a Pulsar DuploCart system, to make the vape a dual 510 cart system with the ability to choose between left, right or simultaneously firing. I have more findings from examining the various pieces but I think this is an accomplishable feat. Thoughts, guidance, and general perspective will always be appreciated!!

 

[animal.]

If often thought about doing something similar, just never had the time. Let me know how it turns out.

My only thoughts would be how the board would work with 2 different builds at the same time. With the way circuitry works if one was a slightly lower resistance would the 2nd coil even fire? Or would it simply work like a dual coil build.

 

[Th3G00dC00k]

If often thought about doing something similar, just never had the time. Let me know how it turns out.

My only thoughts would be how the board would work with 2 different builds at the same time. With the way circuitry works if one was a slightly lower resistance would the 2nd coil even fire? Or would it simply work like a dual coil build?

I believe it should work the same as a dual coil build if I'm understanding correctly. forgive the borrowed image, but the cart system I'll be borrowing operates off of those pins in the bottom of the device. I was able to remove the spring pin assembly from the board and I identified the positive and negative leads. So if I wire the pins to the atomizer terminals and use some of the fittings I can use this magazine system. At least that's the theory!! I have a spare board from my SMOK thallo that I'm gonna test the theory with. The fourth image in the original post gives a better shot of the pins I'm referring to. I hope this gives further insight to my logic. I'm going off of intuition more than anything and "think about it" logic lol