FT Russian 91%

[atomised]

I've just received a FastTech Russian 91%. https://www.fasttech.com/products/1612101*

I took it completely to bits to degrease it. I'm glad I did.
The air channel in the centre pin** was full of grease. It would have worked, but with very reduced air flow.

I wicked it with cotton and 28 AWG kanthal from StealthVape ( they are one impressive supplier ).

I stuck it on a FT VAMO V5.

It's such an astonishingly good vape that I'll overlook the grease.

* This FT clone is not the same as the Russian 91% in pbusardo's video :
https://www.youtube.com/watch?v=aWrFsa6YOaE

The connector pin assembly is like the Kayfun (ie:not really adjustable) and the top cap is different it has a captive O ring to mate with the chimney (an improvement).

** If you look at the atty upside down, it's the screw in the middle of the 510 connector that holds the centre terminal post to the deck. You unscrew it as much as possible (terminal post will fall off) and pull it out with pliers.

 

[cheersm8]

If you buy a 'chinese' Russian or Kayfun Lite clone, chances are they will arrive in the same packaging and be identical (unless, of course, it's a chinese KF with the svoemesto logo)

The cheapy focalecig KF lite I got while it was on offer was exactly the same as my fastech Russian. Or? was my fastech Russian the same as the focal KF Lite?

Either way, they are damned good atties.