Geek Vape Zeus X

[John68]

Hello,
Had this for a while, very happy with it
Sometimes after rewicking I seem to get a mouthful of juice
I use cotton bacon, do not fill right up and let it sit for an hour
Any help would be much appreciated

 

[Crispycritters]

Hello,
Had this for a while, very happy with it
Sometimes after rewicking I seem to get a mouthful of juice
I use cotton bacon, do not fill right up and let it sit for an hour
Any help would be much appreciated

It is wise to let new stock coils wick for 5 - 10 minutes when you first put them in the tank but there is no requirement to do this with an RTA. When you re-wick you should juice up the wick, re-assemble the tank, close off the airflow, fill the tank, open the airflow and vape it immediately after filling. Sometimes the pressure inside the tank increases when you fill and fit the top cap - if you vape immediately this reduces any over-pressurisation and helps stop flooding.

 

[ADDicT]

Had this tank for a good while now, very good tank IMO.

Sometimes the wicks will be oversaturated after rewicking in my experience. What I usually do is hold the fire button and blow gently to vaporize off any excess juice in the wicks, usually 1-3 times of doing this and it's good to go.

As above, there is no need to let it sit like with a stock coil tank, assuming you prime the wicks before screwing the deck in to the tank.

 

[Weediv]

Have a look at this mate, fixed mine

 

[John68]

It is wise to let new stock coils wick for 5 - 10 minutes when you first put them in the tank but there is no requirement to do this with an RTA. When you re-wick you should juice up the wick, re-assemble the tank, close off the airflow, fill the tank, open the airflow and vape it immediately after filling. Sometimes the pressure inside the tank increases when you fill and fit the top cap - if you vape immediately this reduces any over-pressurisation and helps stop flooding.

Many thanks
Will give it a go

 

[John68]

Have a look at this mate, fixed mine

Thanks, very helpful