Hazard rta/rda help please

[big john]

Can anyone tell me if the sxk Boro tank is ok for the hazard bridge I'm using a different Boro ATM but the ohms are all over the place

 

[stuartd]

Can anyone tell me if the sxk Boro tank is ok for the hazard bridge I'm using a different Boro ATM but the ohms are all over the place

Yes and I've used the snailtank sm crypt tank. the only one I tried that didn't work was the stock tank for the cthulhu aio the pin isn't long enough as in pic

 

[big john]

Yes and I've used the snailtank sm crypt tank. the only one I tried that didn't work was the stock tank for the cthulhu aio the pin isn't long enough as in pic

View attachment 307301

I'm using the tank in pic and I'm having to keep adjusting the 510 screw on mod as ohms keep jumping all over many thanks for the advice I'll get the sxk Boro ordered now

 

[stuartd]

I'm using the tank in pic and I'm having to keep adjusting the 510 screw on mod as ohms keep jumping all over many thanks for the advice I'll get the sxk Boro ordered now

That's the same crypt tank I have but mine is smoked i used mine in a cthulhu aio and bxr and no real ohm jumping on thise mods and you should maybe pick up some gaskets aswell they come in handy. iam not sure if ecigone sell them but naturevape do sell them

 

[Phrasing]

Ive used the hazard in stock boros crypt boros proro boros and the rta.

Your ohms are probably jumping because of a short in the top cap, the tolerances for the hazard rba are miniscule, even if it reads perfectly outside of the boro the added pressure of having the caps on it can make it short.

Take off the top cap and run your finger over the edges (gently it's sharp) if you can feel the leads they're too long.

What I do is leave them a little long intentionally and then bend them up before I snip so there's nothing past the screw.

 

[big john]

Ive used the hazard in stock boros crypt boros proro boros and the rta.

Your ohms are probably jumping because of a short in the top cap, the tolerances for the hazard rba are miniscule, even if it reads perfectly outside of the boro the added pressure of having the caps on it can make it short.

Take off the top cap and run your finger over the edges (gently it's sharp) if you can feel the leads they're too long.

What I do is leave them a little long intentionally and then bend them up before I snip so there's nothing past the screw.

Yes I'm beginning to think it's a coil short tbh I'm not 100% sure I checked after cutting legs lol I was rushing to get it set up ffs I'll check it in morning now cheers guys for your time

 

[Banjostring]

Going by the position of your rba in the tank, it looks like you've cranked it down quite hard. Even though the top part of the rba and the juice caps lock everything in place, this could have moved it a teeny tiny bit and as @Phrasing says, the tolerances are minuscule. Even if your coil was reading correctly before putting the rba into the boro, this cranking down could be causing the problem.

 

[JohnNada]

Mine works in the Crypt, Limelight and SXK boro. I do have to raise the pin in the Pulse a little bit though, especially with the Crypt.

 

[big john]

Going by the position of your rba in the tank, it looks like you've cranked it down quite hard. Even though the top part of the rba and the juice caps lock everything in place, this could have moved it a teeny tiny bit and as @Phrasing says, the tolerances are minuscule. Even if your coil was reading correctly before putting the rba into the boro, this cranking down could be causing the problem.

It's not down too tight to be honest it's quite loose on top oring anyway soughted the short issue lol now I've lost the flavour it's a bit muted FFS pmsl I'm beginning to fall out with this Boro game after squonking for years never had these issues everything is so small don't help with size 10 hands lol

 

[mattc1]

It's not down too tight to be honest it's quite loose on top oring anyway soughted the short issue lol now I've lost the flavour it's a bit muted FFS pmsl I'm beginning to fall out with this Boro game after squonking for years never had these issues everything is so small don't help with size 10 hands lol

All you have to do is ask yourself if it is all worth it?. And then finding the next bit in Boro tank (what ever it is called) that suits your style all over again.
But enjoy the ride, if thats the ride you want