Hello from M-VAPES new uk based vaping equipment and accessories

[xXCooLGuYXx]

He said the limit for low ohms is 0.2 and the mod can run at 7 volts. If I'm correct that's 245 watts so it should be well capable of what you need.

Not really sure why you'd need that sort of power from a regulated mod though.

Thanks and I have my rx200 I hit at 200 and thanks .

 

[xXCooLGuYXx]

Hi all our boxes run the murata okl t/20 chip on a custom big al's board they are regulated devices.

Do you have a pic of the screen and all of what on the led screen ?

 

[xXCooLGuYXx]

Hi all our boxes run the murata okl t/20 chip on a custom big al's board they are regulated devices.

This might sound dumb to you but what's that black circle at the bottom of the box ?

 

[xXCooLGuYXx]

Hi all our boxes run the murata okl t/20 chip on a custom big al's board they are regulated devices.

An is that a 510 pin ? An can I us any tank on here ? Or what can I us ?

 

[matt-lmr]

Hello the OKl T/20 chip is a variable voltage device our one sits ontop the big al's custom board the resistor in the potentiometer circuit is slightly higher than normal so the voltage range is from 4.15 to 7.5volts however the volts depend on the coil ohms.
I have tested one of our devices to the limit and ran a 0.15ohm coil at 100% it was pushing out 156watts at 5volts and 31amps!
This is way beyond the limit of the chip and board and probably way beyond my batteries amp limits too so not a very clever thing to do for an experienced person but it was done as test under test conditions to push the limits of the design.

If you do not understand much about mods and battery safety and would rather rely on a mod to do all the protection for you stick with things that have all the built in safety features.

Our boxes are not designed for huge wattage although clearly capable as you can see from the test they are designed as a smooth power delivery vape with a power range to suit most sensible vapers.

The black circle is a potentiometer it is what the user uses to control the power percentage of the device.

As always i recommend any vaper to familiarise themselves with ohms law and battery amp limits regardless of if its relevant its always handy to know.
Check out the steam engine.org website.

If you want me to build you a 200w device i can do so using something like the dna200 but the overall design would be different and the cost would be higher for a custom order.

 

[Addymk2]

Do you have a pic of the screen and all of what on the led screen ?

There is no LED screen you control the power using the Potentiometer.

 

[matt-lmr]

There is no LED screen you control the power using the Potentiometer.

We actually do 3 options,
option one no screen
option two with mod meter display (shows ohms, volts to coil, battery level and amp draw)
option three simple digital voltmeter display.

 

[pfvapes]

@Matt-imr

Dangnabbit I totally frigfing missed this!!!

Never mind lol, I've just got a brass bezled beauty in my basket woop!

 

[Addymk2]

We actually do 3 options,
option one no screen
option two with mod meter display (shows ohms, volts to coil, battery level and amp draw)
option three simple digital voltmeter display.

Apologies, I've letched on them so much now I should have known that! Haha

 

[matt-lmr]

Built myself this the other day, as i wanted to use my 25mm serpent mini on one of our box mods with a flush fit also facied trying our Ric's new bezels