Kanger Pro Tank 3, any possibility of rebuilding the coils

[VaperBen]

I've bought myself the Kanger Pro Tank 3 & a 10 pack of coils, It hasn't actually arrived yet but I'm just pondering whether any of you lot have rebuilt the coils or had a go at doing them?

I had a Totally Wicked RB1 Rebuildable but it was nothing but trouble to me, changing the coils wasnt difficult but the juice just leaked from everywhere. I've never actually created a coil I used pre wound ones that came with that unit.

So yeah' my experience is very basic in rebuilds.

 

[CharlieMD]

I rebuild my pt3 coils all the time it's surprisingly easy if u look on the tube

 

[VaperBen]

I rebuild my pt3 coils all the time ithe tube

I'll have a look later on, it's literally just arrived about 15 minutes ago. Pleasantly suprised by the quality of it too, got plenty of coils with it but going to have a go

 

[stephenfletcher]

HI, ive done vivinovas, pt2's but the pt3 i found difficult as the coils are in parallel. since when you have coils in parallel the overall resistance is derived from the product divided by the sum, its hard to get one above 1.3 ohms for my vamo. but higher resistance kanthal would have helped. But if your using a mech mod it wont matter :-) enjoy its a good tank, but i found the coils dont last very long, the new aerotank coils fit, maybee they will last longer?

 

[modestvaper]

I rebuild my pt3 coils all the time it's surprisingly easy if u look on the tube

haven't you had any air flow issues with the pt3? i bought one with all the excitement when it was launched.. based on my experience with evods and pt mini2 but the airflow was too tight.. in fact no air flow if screwed all the way down.. so right now its lying in the abyss somewhere!

 

[CharlieMD]

One I had did have this issue it was tight but usable the other was fine until the Mrs lost it the otherday

Sent from my HTC One X using Planet of the Vapes mobile app

 

[VaperBen]

HI, ive done vivinovas, pt2's but the pt3 i found difficult as the coils are in parallel. since when you have coils in parallel the overall resistance is derived from the product divided by the sum, its hard to get one above 1.3 ohms for my vamo. but higher resistance kanthal would have helped. But if your using a mech mod it wont matter :-) enjoy its a good tank, but i found the coils dont last very long, the new aerotank coils fit, maybee they will last longer?

Hi mate i've heard that the pt2 coils are compatible, I've been thinking about trying a few out because this dual coil seems a gimmick to me :\ with me being a noob I thought I'd be better building the singles

 

[Vapingmonkey]

PT2 coils do not fit.

https://www.youtube.com/watch?v=PHjuC7jn30A&feature=youtube_gdata_player

 

[VaperBen]

haven't you had air flow issues with the pt3? i bought one with all the excitement when it was launched.. based on my experience with evods and pt mini2 but the airflow was too tight.. in fact no air flow if screwed all the way down.. so right now its lying in the abyss somewhere!

A Review up on YouTube said that the aerotank base can be put onto the Pro tank 3, I haven't got a clue if you can buy that component separately but it's worth looking into. I haven't really noticed any issues but I prefer a really tight draw to be honest with you, I'm pretty happy with it.

 

[VaperBen]

PT2 coils do not fit.

https://www.youtube.com/watch?v=PHjuC7jn30A&feature=youtube_gdata_player

I'm sorry my information was wrong then in that case, I know I've seen a video that said it so I just took that on fact, thanks for correcting me though as I very nearly bought a pack of those coils for it today!