Last bit of juice.

[Banjostring]

Hi all, I'm hoping someone can help me here please.
I'm using a Kanger Dripbox 160 and loving it, my problem is that there always seems to be a little bit of juice left in the bottle that I can't squonk out.
Has anyone found a way round this? I like to change flavours often and always end up wasting that little bit at the bottom of the bottle, I know it's not much but with all the juice swapping I do, it all adds up.
Any help or suggestions will be very much appreciated.
Thanks.

 

[BULLDOG1964]

Hi have you tried tilting your dripbox then squeeze the bottle thats what i do with my gbox and that seems to do it..

 

[Banjostring]

Hi have you tried tilting your dripbox then squeeze the bottle thats what i do with my gbox and that seems to do it..

Thanks, but no, it doesn't work. There's like a brass plunger thing that comes down directly in the centre of the bottle but it doesn't reach all the way down.
I'm thinking maybe if I cut a mm or so off the neck of the bottle it might go up a bit further and allow the plunger bit to reach the bottom.

 

[BULLDOG1964]

Thanks, but no, it doesn't work. There's like a brass plunger thing that comes down directly in the centre of the bottle but it doesn't reach all the way down.
I'm thinking maybe if I cut a mm or so off the neck of the bottle it might go up a bit further and allow the plunger bit to reach the bottom.

Hi sorry i cant help then but iam sure you will get a reply from someone who will no good luck anyway..

 

[speedfreek67]

Vape your cotton as dry as you dare, then when you take the bottle off to refill it, just pour the last dregs into your atty so the cotton soaks it up.

 

[Banjostring]

Vape your cotton as dry as you dare, then when you take the bottle off to refill it, just pour the last dregs into your atty so the cotton soaks it up.

What a great idea. Thanks, I'll do that. Would still like to find a way to shoot it all up into the juice well but I can see this working.

 

[eyeball kid]

What a great idea. Thanks, I'll do that. Would still like to find a way to shoot it all up into the juice well but I can see this working.

Yep. As speed freak said. Pour the dregs into the rda.
Not only could you see this working. Come round mine and you will see it working, lol.
Ten ml bottles as well. When I've used one up I stick it upside down and give it a shake then use it to prime my wicks the next time I rewick.
Thrifty bastard.

 

[Banjostring]

Yep. As speed freak said. Pour the dregs into the rda.
Not only could you see this working. Come round mine and you will see it working, lol.
Ten ml bottles as well. When I've used one up I stick it upside down and give it a shake then use it to prime my wicks the next time I rewick.
Thrifty bastard.

And there was me trying to find a bottle modifying /engineering solution.
It's usually the simplest of ideas that work best.
Thanks for the input.

 

[eyeball kid]

And there was me trying to find a bottle modifying /engineering solution.
It's usually the simplest of ideas that work best.
Thanks for the input.

If your feeling handy. You can dremel the juice bar off at the top and fit a normal squonk bottle that reaches the bottom but you still get a little residue and the bar and plunger squonk set up is always the least leaky for me.

 

[Banjostring]

If your feeling handy. You can dremel the juice bar off at the top and fit a normal squonk bottle that reaches the bottom but you still get a little residue and the bar and plunger squonk set up is always the least leaky for me.

I don't really want to be chopping the mod itself, but I had an idea to take a mm or so off the neck of the bottle so that the bottom of it ends up a bit higher. Obviously I would need a little packing on the cover that goes under the bottle. Do you think this would work?