Lemo Drop Issue

[snaeem155]

Hi All,

I have 3 lemo drops.

1 is perfect and is faultless

1 tastes of nothing/stale no matter what I do.

Last ones 510 centre pin is so loose it falls out or g8ve inconsistent readings all the time.

Any advice on how I can fix the last two? It's my all time favourite RTA!

Thanks

 

[jsixtysix]

Loose one: take the base off. See the airflow adjustment? Tighten up that slotted screw in the centre.
As for the taste - I noticed an improvement with spaced coils, might be worth a try. 26AWG around 0.4/5 ohms.

 

[snaeem155]

It's not the slotted screw that's loose it's the one that makes contact with my mod.

 

[jsixtysix]

Ok then - in the bit unscrewed from the base the round block can be tightened down if you grip it with something rubbery, and at the same time you can tighten up the screw that contacts the mod underneath with a screwdriver. Hope that helps.

 

[Tinkerbelle]

I have had similar problems with my lemo drops at times. These are also my favourite rta's. I find that after I have filled the tanks a few times that the pin which contacts with the mod becomes loose or too tight and needs readjusting. Also if I have fidldled with the air flow bit that the centre pin will get loose/tight and will again need re-adjustment. Worth the fiddling with though! If the second tank you described as getting no flavour with at all is useless to you why not swatch that bottom bit with the centre pin in the third tank? Just a thought.

 

[snaeem155]

I'll give this a try, thanks.

One is black and one is silver.