What's new

Mods giving me trouble

vapingadayaway

Initiate
Joined
Sep 28, 2014
Messages
20
Both of these arent even a week old and they were working fine now neither of them blows hardly any vapor at all both have fully charged 350 batteries in them. Please if you know of any trouble shooting please let me know thanks in advance.
 
Have you checked the connectors are still fitting correctly? Had a mod where the neg unscrewed a little every time I changed battery. Also check the pos post is connecting to the atty.
 
How do I check the pos post connecting to the atty? Because ive already checked and the adjustment screw is touching the battery I hear no rattle at all.
 
on some mods (eg neme) the pos post is adjustable. if it is back it off, fit the atty then tighten up until it touches
 
I just did that and it hit better than it was once or twice then it went back to barely hitting.
 
Do you have any other mods to check the atties on? just thinking they might be better with a new wick, but if you can check they are OK it is more than likely a mod issue?
 
I dont have any others but I bought both of these days apart and now both have the same problem I dont understand it.
 
Not much info there mate. Coils, contacts, wick, buttons, springs, choice of eliquid? lots of areas where things could be falling down. Bit odd for two units to fail so quickly.

Edit. started to write this when there was only one response. See there are lots on it now.
 
Both of these arent even a week old and they were working fine now neither of them blows hardly any vapor at all both have fully charged 350 batteries in them. Please if you know of any trouble shooting please let me know thanks in advance.

Clean all your connections and screws, switch etc.

Make sure the coil is good in the atty.

Check atty resistance to make sure there are no shorts etc.

Make sure everything is making a solid connection to minimise voltage drop
 
Back
Top Bottom