My first mod. Pic heavy.

[doobedoobedo]

Thanks again everybody. Only problem I have is sourcing good 510 connections, ordered some stainless steel ones but they are using rubber insulators so Ill have to make some delrin ones. You don't want shorts when using a mech.

Lovely mod mate.

I know the feeling about the 510s. You can get SS 510 with acetal insulator from here http://www.atmistique.gr/en/connect...page_images.tpl&product_id=541&category_id=58 not cheap but the best off the shelf 510 I've found.

 

[BaDaBooM]

Lovely mod mate.

I know the feeling about the 510s. You can get SS 510 with acetal insulator from here http://www.atmistique.gr/en/connect...page_images.tpl&product_id=541&category_id=58 not cheap but the best off the shelf 510 I've found.

Thank you

Just what Ive been looking for, thanks. You don't happen to have the measurements ? diameter and height.

 

[doobedoobedo]

They're 8 or 9mm high, can't remember the drill size I'm afraid .

 

[BaDaBooM]

They're 8 or 9mm high, can't remember the drill size I'm afraid .

Height is the most important, thanks man.

 

[RicModMaker]

Lovely work. Very impressed.

Sent from somewhere just south on our nations capital.

 

[Chegs]

Thanks again everybody. Only problem I have is sourcing good 510 connections, ordered some stainless steel ones but they are using rubber insulators so Ill have to make some delrin ones. You don't want shorts when using a mech.


I have exactly the same problem, so bought 10 from ft but not received them yet so can't really say what the result of my gamble will be.

Sent from my SM-T210 using Planet of the Vapes mobile app

 

[RicModMaker]

I've been using them and they are a bit touch and go Chegs. If I can give you a tip, when you connect the wire to the centre piece, get the rubber insulator back into the housing before pushing the centre back in. I've also had trouble with them if the wire isn't straight so I've got some silicon tubing coming that I'll push over the centre and the wire to stop shorts.
There really should be a decent connector out there but I'm yet to find it too. I've considered buying a tap and die set and making !y own but haven't yet. If only there were bolts available in the right size. I've searched and searched and they don't exist as far as I know.

Sent from somewhere just south on our nations capital.

 

[BaDaBooM]

Thanks again everybody. Only problem I have is sourcing good 510 connections, ordered some stainless steel ones but they are using rubber insulators so Ill have to make some delrin ones. You don't want shorts when using a mech.


I have exactly the same problem, so bought 10 from ft but not received them yet so can't really say what the result of my gamble will be.

Sent from my SM-T210 using Planet of the Vapes mobile app

FT are using rubber aswell.

 

[Darrentino]

I love box mods and those are ringing my bell.
Well done
it must be sweet vaping on something you've made yourself.

 

[Chegs]

Ahh bollocks, guess I'll just have to be inventive as I already have the tap for the 510's. I was hoping to avoid drilling stainless steel lumps then tapping it but once the ft 10 have been used up, I guess I'll have to

Sent from my SM-T210 using Planet of the Vapes mobile app