New rda day and recommendations

[gog78]

A new rda arrived today, a heelvape rebirth rda for the rincoe mechman and waiting on royal fail for the juice. Any recommendations for a good 30-35mm rda/rta/rdta for the snowolf 218 triple 18650 mod, was thinking either steamcraves ragnar or arromamiser v3 or vapour vapourclouds osiris

 

[Moses]

A new rda arrived today, a heelvape rebirth rda for the rincoe mechman and waiting on royal fail for the juice. Any recommendations for a good 30-35mm rda/rta/rdta for the snowolf 218 triple 18650 mod, was thinking either steamcraves ragnar or arromamiser v3 or vapour vapourclouds osiris

RDA, the Asgard

 

[P2PLeon]

Only if you want juice for days would I get a steamcrave.

As they can hold 30ml or even 40ml of juice.

 

[vapervince]

The thing with RDA`s is that even with a 22 or 24mm with enough air flow and the right coil and juice, you can get a vape that can satisfy an ex 4o a day smoker. If you are using the extra battery power available to you to reduce the number of battery changes, good, if you are using the extra battery power to vape at 120 watts I would think that you need to look at your build set up.

 

[conanthewarrior]

The thing with RDA`s is that even with a 22 or 24mm with enough air flow and the right coil and juice, you can get a vape that can satisfy an ex 4o a day smoker. If you are using the extra battery power available to you to reduce the number of battery changes, good, if you are using the extra battery power to vape at 120 watts I would think that you need to look at your build set up.

I agree with this myself, but do understand some people liking larger RDA's. I tried the Buddha V2 30MM RDA and could not get on with it. I prefer a 22-24MM RDA or RTA and build with standard wire, I can get the surface area on the cotton the same as more exotic builds but vape at 25-30W and still get the same cloud chucking performance.

Having 3 batteries would add up to a load of battery life at this power, I do own the Wismec reuleaux DNA200 and the Wismex RX200 (same mod, but one uses its own board, pretty certain you can customise it with arctic fox custom firmware like Joyetech mods, a lot cheaper than the DNA200 version) that use 3 batteries, but I really don't need that now I vape at a lower power level. My Voopoo Drag X uses a single 18650 and with a Molicell P26A I get a day of battery life.

 

[Moses]

I normally have a Boro on the go for day time and then night time I either use a rta or RDA. I do favour more towards a rda and a squonk mod. The only rda I use over 100watts is the Asgard 28mm with a 0.10 build in it.

 

[conanthewarrior]

I normally have a Boro on the go for day time and then night time I either use a rta or RDA. I do favour more towards a rda and a squonk mod. The only rda I use over 100watts is the Asgard 28mm with a 0.10 build in it.

I had to look up what a boro is, and now I am really interested!

Do you have one of the RBA's for it or do you use coils, if so what coils are compatible and what type of power do you need to run them at?

The only all in one mod I have is one by Kanger, and it isn't the best.

 

[Moses]

I had to look up what a boro is, and now I am really interested!

Do you have one of the RBA's for it or do you use coils, if so what coils are compatible and what type of power do you need to run them at?

The only all in one mod I have is one by Kanger, and it isn't the best.

Currently using this aio Boro mod

 

[Moses]

I have quite a lot rba's and I personally use simple fused claptons MTL coils. 0.50 to 0.70 and I use a MTL staple and they are 0.40 to 0.60 and run them around 20 to 25 watts. I do use a 0.30 build in my mech Boro mods.

 

[vapervince]

My go to RDA is a Wotofo profile, it comes as a rta but you can just use the bottom section, the best part is that you can get a full 6mm wick in it and with a clapton mesh coil it`s the best vape, in terms of flavour, that I`ve ever had, I`ve just switched to AIO vaping myself but I keep the profile primed and ready for the evenings.