Warlordxxx
Postman
- Joined
- Oct 13, 2012
- Messages
- 83
Todays mods are the good old Altoid tins.. - (Don't worry Lee i only made 4)
Warlords Altoid VV Tin mod
Made with a black 3a horn switch. A dual 14500 battery mod that just plain works voltage range from 3v - approx 6v (depending on energy remaining in the batteries)
Please ensure both batteries are at a level state of charge before placing them in the mod to use.
Mods will be set to 4.2v before sending
Features
Native 510 connection
Stainless washer / Drip guard ( spaces out the connector so tanks can be used without issue
Interior volt meter
Interior pot adjustment
Interior on/off switch
3A horn switch
Batteries
14500 3.7v Li-Ion protected batteries will fit into this mod.
Please ALWAYS USE protected batteries inside this mod using unprotected batteries may lead to battery failure and render the battery useless.
Please charge your batteries safely and to the chargers guidelines – Never leave the house while batteries are charging or use a charger overnight.
To ease removal of the batteries use a piece of insulation tape wrapped around the battery with the ends joined to make a pull tab.
If shorting occurs in this mod there is a switch at the front to turn the device off cutting power from the battery – This is a safety feature on the device but can also be used to prevent mis-fires in the pocket and to switch the device off when not in use.
General Use
The 14500 batteries fit into the mod as per the diagram on the inside of the box – Negative (flat side) to the spring – Positive to the flat terminal
Once the batteries are inserted move the on-off switch to the ON position and close the door of the mod. Adjust voltage as required using the small screw on top of the blue potentiometer.
Attach your atomizer or cartomizer to the top 510 connection – Press the button switch and vape.
Price to the forums is £25 including P&P and paypal fees (recorded delivery is £3 extra if required)
Warlords Altoid VV Tin mod
Made with a black 3a horn switch. A dual 14500 battery mod that just plain works voltage range from 3v - approx 6v (depending on energy remaining in the batteries)
Please ensure both batteries are at a level state of charge before placing them in the mod to use.
Mods will be set to 4.2v before sending
Features
Native 510 connection
Stainless washer / Drip guard ( spaces out the connector so tanks can be used without issue
Interior volt meter
Interior pot adjustment
Interior on/off switch
3A horn switch
Batteries
14500 3.7v Li-Ion protected batteries will fit into this mod.
Please ALWAYS USE protected batteries inside this mod using unprotected batteries may lead to battery failure and render the battery useless.
Please charge your batteries safely and to the chargers guidelines – Never leave the house while batteries are charging or use a charger overnight.
To ease removal of the batteries use a piece of insulation tape wrapped around the battery with the ends joined to make a pull tab.
If shorting occurs in this mod there is a switch at the front to turn the device off cutting power from the battery – This is a safety feature on the device but can also be used to prevent mis-fires in the pocket and to switch the device off when not in use.
General Use
The 14500 batteries fit into the mod as per the diagram on the inside of the box – Negative (flat side) to the spring – Positive to the flat terminal
Once the batteries are inserted move the on-off switch to the ON position and close the door of the mod. Adjust voltage as required using the small screw on top of the blue potentiometer.
Attach your atomizer or cartomizer to the top 510 connection – Press the button switch and vape.
Price to the forums is £25 including P&P and paypal fees (recorded delivery is £3 extra if required)
Last edited:
