icemanistheking
Initiate
- Joined
- Apr 21, 2014
- Messages
- 36
Grand Vapor Private V2 (authentic) - original copper bottom cap.
Selling from US. Will ship worldwide. I pay PP fees, but buyer pays for shipping method of choice. If shipping to your address is exorbitant, we may be able to work out a lower price to compensate.
Current going rate - US online market: $170 to $180 or ~£100-£105
Price: £60 or ~$102 OBO
Condition: 7/10 - the only reason I give it a 7, is because the inside lower surface of the copper bottom cap is scuffed about 1/2-3/4 of the way around (hard to see well in the pic, but that was the best I could get). This is from a sanding session mess-up, while smoothing out the top edge of the threads...it is only a surface scuff and it is not visible from the outside of the mod while assembled. Both mod pics below are taken after the "incident"...as you can see, the rest of the mod is in great condition. The scuff could be smoothed out either by buffing/polishing or sanding smooth. The only other thing worth mentioning, there are some light surface scratches on the top and bottom caps from normal use - i.e., setting on hard surfaces, screwing in and removing attys, etc.
Description: Telescoping brass tubes, copper top and bottom contacts...obviously hits much harder than your average mostly-stainless mod! I love the mod but I need the cash more right now. Has the original spring rather than the newer magnets. Later versions have a brass bottom cap (the "bottom cap" appears to be a thin ring when fully assembled...the bottommost SS portion of the mod is the locking ring, which sits flush over the button when locked).
Price is not necessarily firm (make me an offer!), but I will not be doing any official price drops.
Thanks,
Bryan
Selling from US. Will ship worldwide. I pay PP fees, but buyer pays for shipping method of choice. If shipping to your address is exorbitant, we may be able to work out a lower price to compensate.
Current going rate - US online market: $170 to $180 or ~£100-£105
Price: £60 or ~$102 OBO
Condition: 7/10 - the only reason I give it a 7, is because the inside lower surface of the copper bottom cap is scuffed about 1/2-3/4 of the way around (hard to see well in the pic, but that was the best I could get). This is from a sanding session mess-up, while smoothing out the top edge of the threads...it is only a surface scuff and it is not visible from the outside of the mod while assembled. Both mod pics below are taken after the "incident"...as you can see, the rest of the mod is in great condition. The scuff could be smoothed out either by buffing/polishing or sanding smooth. The only other thing worth mentioning, there are some light surface scratches on the top and bottom caps from normal use - i.e., setting on hard surfaces, screwing in and removing attys, etc.
Description: Telescoping brass tubes, copper top and bottom contacts...obviously hits much harder than your average mostly-stainless mod! I love the mod but I need the cash more right now. Has the original spring rather than the newer magnets. Later versions have a brass bottom cap (the "bottom cap" appears to be a thin ring when fully assembled...the bottommost SS portion of the mod is the locking ring, which sits flush over the button when locked).
Price is not necessarily firm (make me an offer!), but I will not be doing any official price drops.
Thanks,
Bryan
