Problem with the Drop

[ian Allaway]

Hi All
I have a issue with the Digi flavour Drop. I keep building it but it keeps leaking out of the air holes. I am using it to squonk. I build it at .18-.20 ohms. I use SS316 3mm id and 5 wraps. It works great but always leaking from air holes. The coils are just above the posts. I vape at 40-50 watts.

Any help would be great.

Thank you
Ian

 

[mattyk2010]

Move your coils towards the center a little and stop over squonking

 

[ian Allaway]

Hi Mattyk2010 Thank you so much I will try that today. Also could I ask is ss316 better than NI80 22/38 flattened wire.

Thank you

 

[Deleted member 54254]

Looks a bit heavy on the cotton too... here's a piccy with a couple of 2.5mm ID flatwire coils in.

 

[ian Allaway]

Hi John R, they look awesome what wire are you using and what Ohm

Thank you

 

[Deleted member 54254]

Ni80 brochrome from Stealthvape, other wire suppliers are probably similar. Those one's will probably be around 0.16-0.18 for the pair as that's my sweet spot on a mech for the Drop, of which I have twelve, LOL.

 

[ian Allaway]

Thank you I have 22ga i think from crazy wire comp .81X.4 Thickness. for .18 i need 11 wraps for .2 dual coil 2.5mm id
I have 2 and 2 dead rabbits but drop is better

 

[Deleted member 54254]

Another gratuitous deck shot.

 

[ian Allaway]

I have 22ga i think from crazy wire comp .81X.4 Thickness. for .18 i need 11 wraps for .2 dual coil 2.5mm id
What thickness is best

They look good

 

[Deleted member 54254]

I use 24awg, 2.5ID, probably around 6 wraps. Placed on the deck like the pictures above. Specs will be on Stealthvapes website, dunno how thick it is tbh, I just use it and keep a couple of spools spare.