Digicig
Postman
- Joined
- Jul 11, 2012
- Messages
- 699
I paid for the Terminator + adapter but also got sent for free to review, a full Terminator tank - my Opinion will be as subjective as ever and true for me at least 
Ordered a Smok Terminator with adapter (juice/airflow adjuster) from Vaperus.ie - for a bargain 4.59 Euros - and mentioning i had plans on reviewing it - and wan't sure it would fit me Lil Moma/Big Daddy tank - Angela added the full Terminator in tank too - thanking her most kindly
So having watched Todd's 'review' of it (
) went and found a few reviews including Red Wolf's that had a decent how to for rebuilding too
The Tanked Terminator - i decided to use straight out of the box - adjusted the juice flow, to almost closed (by screwing the 'adapter' up to almost cover the hole) and carefully filled with juice from the top. An ickle tricky as the caps want to come off but not too bad. The tank itself is the same size as the Big Daddy and the top sticks out of the top by 5mm or so - so could be better (might get me junior hacksaw out).
Put a few drops of juice (about 8-9) down the hole and ready to vape
Popped it on me P+ and a bit of a gurgle to begin but then a tightish draw but OK vapour production. I found that twisting the tank anti-clockwise seems to open the airflow up and twisting clockwise tighten it up - so quite easy to adjust to find thy own draw preference
There is a slight taint to the flavour - nothing major but filled with Praze which i know very well - and it's just got a taste that doesn't quite belong. Aside from that - not bad for straight out of the box
The 2nd one - just the Terminator RDA - i broke down and gave a thorough rinse under the tap, before dabbing off the wicks and dry burning. during the process i noticed that a few of the coils were touching (which might explain the slightly of taste in the tanked one) so spread them out nicely before dowsing in juice and putting it back together.
Decided to try this one first as a Dripper - put 8-9 drops in the tube, gave it a blow and found it very airy - so popped the adapter on and screwed it up till almost shut. Big difference - a medium tight draw - nice Vapour Production and much cleaner flavour. Give or take it's not that far off the eBarron Pro i have. There is the faintest taint - which could be the ceramic but definitely good enough to try new flavours - i might see before i do a full review - if the eBarron heads will fit with a bit of tinkering.
As a 1st impression - i'm not certainly not disappointed - nor tempted to borrow an Angle Grinder - but i haven't tried to rebuild one yet either
Ordered a Smok Terminator with adapter (juice/airflow adjuster) from Vaperus.ie - for a bargain 4.59 Euros - and mentioning i had plans on reviewing it - and wan't sure it would fit me Lil Moma/Big Daddy tank - Angela added the full Terminator in tank too - thanking her most kindly
So having watched Todd's 'review' of it (
) went and found a few reviews including Red Wolf's that had a decent how to for rebuilding too The Tanked Terminator - i decided to use straight out of the box - adjusted the juice flow, to almost closed (by screwing the 'adapter' up to almost cover the hole) and carefully filled with juice from the top. An ickle tricky as the caps want to come off but not too bad. The tank itself is the same size as the Big Daddy and the top sticks out of the top by 5mm or so - so could be better (might get me junior hacksaw out).
Put a few drops of juice (about 8-9) down the hole and ready to vape
Popped it on me P+ and a bit of a gurgle to begin but then a tightish draw but OK vapour production. I found that twisting the tank anti-clockwise seems to open the airflow up and twisting clockwise tighten it up - so quite easy to adjust to find thy own draw preference
There is a slight taint to the flavour - nothing major but filled with Praze which i know very well - and it's just got a taste that doesn't quite belong. Aside from that - not bad for straight out of the box
The 2nd one - just the Terminator RDA - i broke down and gave a thorough rinse under the tap, before dabbing off the wicks and dry burning. during the process i noticed that a few of the coils were touching (which might explain the slightly of taste in the tanked one) so spread them out nicely before dowsing in juice and putting it back together.
Decided to try this one first as a Dripper - put 8-9 drops in the tube, gave it a blow and found it very airy - so popped the adapter on and screwed it up till almost shut. Big difference - a medium tight draw - nice Vapour Production and much cleaner flavour. Give or take it's not that far off the eBarron Pro i have. There is the faintest taint - which could be the ceramic but definitely good enough to try new flavours - i might see before i do a full review - if the eBarron heads will fit with a bit of tinkering.
As a 1st impression - i'm not certainly not disappointed - nor tempted to borrow an Angle Grinder - but i haven't tried to rebuild one yet either
