replacement for nautilus mini

[b road blaster]

That will be 5-14 wattage range not ohms
from what i can see about the sinuous solo it will auto detect what wattage setting it needs to be at up to a max of 40w
so yes as long as both tanks have a standard 510 fitting (which 99.9 % do) and you keep to a coil thats does NOT need
more than 40 w you should be fine.

 

[Richard D]

Whilst I'm saving up for a new tank, does anybody have a quick-fix to improve airflow through the NM? I feel it's worse than it ever was. I soaked it in vodka for an hour and rinsed it etc. No better, I'm sucking on it so hard my boxer shorts have disappeared up the crack of my ar$e, which I believe is called 'Vapour's Thong'

I found mine a tad tight, so simply set to largest hole then shoved in the tip of a needle-nose file and twisted a few times - just enlarging the hole by a tiny fraction can make a big difference.

 

[westy11]

I found mine a tad tight, so simply set to largest hole then shoved in the tip of a needle-nose file and twisted a few times - just enlarging the hole by a tiny fraction can make a big difference.

Sounds like my sort of fix, so i might try that if i can spot file small enough in my travels. thanks.

 

[westy11]

That will be 5-14 wattage range not ohms
from what i can see about the sinuous solo it will auto detect what wattage setting it needs to be at up to a max of 40w
so yes as long as both tanks have a standard 510 fitting (which 99.9 % do) and you keep to a coil thats does NOT need
more than 40 w you should be fine.

many thanks b road blaster, forgive my W v O error, but good news is i'm slowly getting to grips with vaping thing thanks to forums and advice here, whilst my dog is being lightly kippered...

 

[b road blaster]

many thanks b road blaster, forgive my W v O error, but good news is i'm slowly getting to grips with vaping thing thanks to forums and advice here, whilst my dog is being lightly kippered...

No probs i'm sure plenty of others will be along to help with advice and suggestions all i can can say is listen to them all
then make your mind up as the best way to go.
As i am sure they will have better advice than me as i have sort of found my happy place with mods / tanks so i tend to
get left behind with all the newer gear thats about and what works best with what.

 

[westy11]

I found mine a tad tight, so simply set to largest hole then shoved in the tip of a needle-nose file and twisted a few times - just enlarging the hole by a tiny fraction can make a big difference.

I took to mine with a cordless drill with a 2mm drilli-bit and opened up the biggest two holes. Seems to have worked! I'm happier now.

 

[westy11]

I've just taken delivery of a nautilus 2. Can I safely use it or my n mini on my endura t22 mod fixed at 14watts?
I am of a nervous disposition.

 

[andyroo]

Which coil have you got in it @westy11

 

[westy11]

Figured on using the 1.8 as its stamped 10-14w, but of course the endura is 14w. I'm afeared of overcooking something.

 

[andyroo]

I’ve got a 1.8 Nautilus coil in my billet box now, I usually go at around 12w but I’ve just tried it at 14w and it seems fine with 60/40 juice, you are going to have to be careful breaking the coil in though going straight at it with 14w, drip some juice into the holes and leave it 10 mins after you’ve filled your tank, then take a few pulls off it without firing and you should be ok.
I definitely wouldn’t go any thicker than 60/40 juice though and 50/50 would be even better.