Searching new sub-ohm tank: need your advice

[LordOdin]

I Had a Falcon Tank but gave it away, i wasn't really using it so thought why not give to someone who needs it. Sometimes wish i had kept it as now pretty low on Tanks.

 

[Jd_]

@Jd_ Not really into all that, stick batteries in mod, fill tank with juice, suck on drip tip.

No, u misunderstood, armour pro has an issue with the vw-n setting that will fry your coils real quick if u dont change it to vw-s. And i was just letting u know where the sweet spot is for the coils it comes with so u dont experiment like i did and waste 15-20 bux of coils.

Like u said, put juice in and vape, work without spending brain power on it.

 

[Jd_]

FULL SIZE

I´m adding this picture in the first post. It allows to get a better view altogether.
Left side, the "babies"; to the right, the sub ohm monsters.

I think the Falcon 2 and the Intake may match and look really nice with the Polar!
As for the babies, the Owl and the Flow Pro may match nice too.

Remember, I dont know whats the color of the mod.... just playing a bit

I really like the look of the zeus, i am biased towards the intake tho cause i really like my intake dual rta

 

[Jd_]

FULL SIZE

I´m adding this picture in the first post. It allows to get a better view altogether.
Left side, the "babies"; to the right, the sub ohm monsters.

I think the Falcon 2 and the Intake may match and look really nice with the Polar!
As for the babies, the Owl and the Flow Pro may match nice too.

Remember, I dont know whats the color of the mod.... just playing a bit

Btw, based on the shape of the drip tip, ill bet money that the valaryan 2 is the most pleasing to use tho, its shaped just like the caascade..unless u r into the whole wide bore style

Heh..tank porn..fun fun

 

[OzoreXS]

Btw, based on the shape of the drip tip, ill bet money that the valaryan 2 is the most pleasing to use tho, its shaped just like the caascade..unless u r into the whole wide bore style

Heh..tank porn..fun fun

Yeah, it looks pretty much like the Nunchaku 2 drip which I have, and its not bad but its a bit small IMO. My lips touch the upper cover. However, Im sure its one of the secrets for such a pure flavour it brings.
Not really looking for a particular drip... if it doesnt burn, cut or has spikes its OK for me.

Tank porn uh? LOL

 

[Jd_]

Yo, i was just searching for the drip tip, of course out of stock everywhere, but came across this page...what the heck is going on here
blog.srpnet.com/vape/uwell-valyrian-drip-tip

Lemme try n link it...
https://blog.srpnet.com/vape/uwell-valyrian-drip-tip

 

[Jd_]

Yeah, it looks pretty much like the Nunchaku 2 drip which I have, and its not bad but its a bit small IMO. My lips touch the upper cover. However, Im sure its one of the secrets for such a pure flavour it brings.
Not really looking for a particular drip... if it doesnt burn, cut or has spikes its OK for me.

Tank porn uh? LOL

Well, length is just as important as girth...
(Thats what SHE said, lol)

 

[OzoreXS]

Some info about the coil options for that tanks (wiki wiki)

Freemax Fireluke 2
TX Series (Tea fiber cotton + 10% cotton):
TX1 SS Mesh: SS316L, 0.12, TC 400ºF~550ºF (Best at 500ºF)
TX1 Mesh: Kanthal, 0.15, 40-90W (Best at 80W)
TX2 Mesh: Kanthal double, 0.20, 40-80W (Best at 70W)
TNX2 Mesh: Kanthal double, 0.50, 20-50W (Best at 40W)
TX3 Mesh: Kanthal triple, 0.15, 50-90W (Best at 80W)
TX4 Mesh: Kanthal Quad, 0.15, 40-80W (Best at 70W)
X Series (Flax cotton + 10% cotton):
X1 Mesh: Kanthal, 0.15, 40-90W (Best at 80W)
X2 Mesh: Kanthal double, 0.20, 40-80W (Best at 70W)
NX2 Mesh: Kanthal double, 0.50, 20-50W (Best at 40W)
X3 Mesh: Kanthal triple, 0.15, 50-90W (Best at 80W)
X4 Mesh: Kanthal Quad, 0.15, 40-80W (Best at 70W)
Others:
The Voopoo UForce 1+2 ones.


Freemax M Pro
M Pro Mesh Series (90% Flax Fiber -Wood Pulp- Cotton and 10% Japanese Organic Cotton Formula):
Quintuple Mesh: Kanthal x5, 0.15, POW 80-100W (Best at 90W)
Quadruple Mesh: Kanthal x4, 0.15, 80-120W (Best at 100W)
Triple Mesh: Kanthal x3, 0.15, 80-110W (Best at 100W)
Double Mesh: Kanthal x2, 0.20, 60-90W (Best at 80W)
Single Mesh: Kanthal x1, 0.15, 40-70W (Best at 65W)
Single Mesh: SS316L, 0.12, POW TC 400ºF~500ºF (Best at 500ºF)
Regular coils:
Kanthal DVC: 0.15, 60-120W
Kanthal DVC: 0.25, 50-100W
Firelock Sextuple: 0.15, 60-140W
Firelock Duodenary: 0.15, 80-180W
Others:
Dont know yet about other compatibilities


Uwell Valyrian II
Main coils:
FeCrAl Quadruple Coil 0.15 Ω = 100-120 W
FeCrAl UN2 Single Meshed Coil 0.32 Ω = 90-100 W
FeCrAl UN2-2 Dual Meshed Coil 0.14 Ω = 80-90W
FeCrAl UN2-3 Triple Meshed Coil 0.16Ω = 90-100W
Others:
Dont know yet about other compatibilities


HorinzonTech Falcon II
Main coils:
Sector Mesh coil, conical, wood pulp+cotton, 0.14, 70-75W
WTF! just 1 coil!?¿?
Others:
Dont know yet about other compatibilities (maybe the OFRF nexMesh..., need to confirm)


Wotofo/OFRF nexMesh Sub Ohm Tank
Main coils:
nexMESH A1, 0.2 ohms, 75W to 85W, Kanthal A1, Organic Cotton
nexMESH SS316L, 0.15 ohms, 350°F to 540°F, 55W to 75W, Organic Cotton
Others:
Dont know yet about other compatibilities (just the same doubt with Falcon 2)


Geek Vape Zeus Sub ohm tank
Main coils:
MeshZ1: 0.40, Kanthal, 60-70W
MeshZ2: 0.20, Kanthal, 70-80W
Others:
Dont know yet about other compatibilities


Vaporesso GTX Tank 22
Main coils:
GTX 0.2Ω MESH: NiCr, DTL, 45-60W (Best: 55W)
GTX 0.3Ω MESH: NiCr, DTL, 32-45W (Best: 40W)
GTX 0.6Ω MESH: FeCrAI, Restricted DTL, 20-30W (Best: 28W)
GTX 0.8Ω MESH: FeCrAI, Restricted DTL, 12-20W (Best: 18W)
GTX 1.2Ω REGULAR: FeCrAI (Dual-wire) MTL 8-12W (Best: 11W)
GTX 1.2Ω MESH: FeCrAI, MTL 7-11W (Best: 11W)
GTX RBA: FeCrAI, 0.7Ω, Restricted DTL, DIY
Others:
Seems like it takes the Voopoo PNPs (but the other way!, GTX coils wont fit in the Voopoo pods)


Augvape Intake Sub-Ohm Tank:
Main coils:
Intake Mesh: 0.15, Kanthal, 60-75W
Intake Clapton Mesh: 0.20, Kanthal+Nichrome, 60-75W
Others:
Dont know yet about other compatibilities

 

[Jd_]

Some info about the coil options for that tanks (wiki wiki)

Freemax Fireluke 2
TX Series (Tea fiber cotton + 10% cotton):
TX1 SS Mesh: SS316L, 0.12, TC 400ºF~550ºF (Best at 500ºF)
TX1 Mesh: Kanthal, 0.15, 40-90W (Best at 80W)
TX2 Mesh: Kanthal double, 0.20, 40-80W (Best at 70W)
TNX2 Mesh: Kanthal double, 0.50, 20-50W (Best at 40W)
TX3 Mesh: Kanthal triple, 0.15, 50-90W (Best at 80W)
TX4 Mesh: Kanthal Quad, 0.15, 40-80W (Best at 70W)
X Series (Flax cotton + 10% cotton):
X1 Mesh: Kanthal, 0.15, 40-90W (Best at 80W)
X2 Mesh: Kanthal double, 0.20, 40-80W (Best at 70W)
NX2 Mesh: Kanthal double, 0.50, 20-50W (Best at 40W)
X3 Mesh: Kanthal triple, 0.15, 50-90W (Best at 80W)
X4 Mesh: Kanthal Quad, 0.15, 40-80W (Best at 70W)
Others:
The Voopoo UForce 1+2 ones.


Freemax M Pro
M Pro Mesh Series (90% Flax Fiber -Wood Pulp- Cotton and 10% Japanese Organic Cotton Formula):
Quintuple Mesh: Kanthal x5, 0.15, POW 80-100W (Best at 90W)
Quadruple Mesh: Kanthal x4, 0.15, 80-120W (Best at 100W)
Triple Mesh: Kanthal x3, 0.15, 80-110W (Best at 100W)
Double Mesh: Kanthal x2, 0.20, 60-90W (Best at 80W)
Single Mesh: Kanthal x1, 0.15, 40-70W (Best at 65W)
Single Mesh: SS316L, 0.12, POW TC 400ºF~500ºF (Best at 500ºF)
Regular coils:
Kanthal DVC: 0.15, 60-120W
Kanthal DVC: 0.25, 50-100W
Firelock Sextuple: 0.15, 60-140W
Firelock Duodenary: 0.15, 80-180W
Others:
Dont know yet about other compatibilities


Uwell Valyrian II
Main coils:
FeCrAl Quadruple Coil 0.15 Ω = 100-120 W
FeCrAl UN2 Single Meshed Coil 0.32 Ω = 90-100 W
FeCrAl UN2-2 Dual Meshed Coil 0.14 Ω = 80-90W
FeCrAl UN2-3 Triple Meshed Coil 0.16Ω = 90-100W
Others:
Dont know yet about other compatibilities


HorinzonTech Falcon King II
Main coils:
Sector Mesh coil, conical, wood pulp+cotton, 0.14, 70-75W
WTF! just 1 coil!?¿?
Others:
Dont know yet about other compatibilities (maybe the OFRF nexMesh..., need to confirm)


Wotofo/OFRF nexMesh Sub Ohm Tank
Main coils:
nexMESH A1, 0.2 ohms, 75W to 85W, Kanthal A1, Organic Cotton
nexMESH SS316L, 0.15 ohms, 350°F to 540°F, 55W to 75W, Organic Cotton
Others:
Dont know yet about other compatibilities (just the same doubt with Falcon 2)


Geek Vape Zeus Sub ohm tank
Main coils:
MeshZ1: 0.40, Kanthal, 60-70W
MeshZ2: 0.20, Kanthal, 70-80W
Others:
Dont know yet about other compatibilities


Vaporesso GTX Tank 22
Main coils:
GTX 0.2Ω MESH: NiCr, DTL, 45-60W (Best: 55W)
GTX 0.3Ω MESH: NiCr, DTL, 32-45W (Best: 40W)
GTX 0.6Ω MESH: FeCrAI, Restricted DTL, 20-30W (Best: 28W)
GTX 0.8Ω MESH: FeCrAI, Restricted DTL, 12-20W (Best: 18W)
GTX 1.2Ω REGULAR: FeCrAI (Dual-wire) MTL 8-12W (Best: 11W)
GTX 1.2Ω MESH: FeCrAI, MTL 7-11W (Best: 11W)
GTX RBA: FeCrAI, 0.7Ω, Restricted DTL, DIY
Others:
Seems like it takes the Voopoo PNPs (but the other way!, GTX coils wont fit in the Voopoo pods)


Augvape Intake Sub-Ohm Tank:
Main coils:
Intake Mesh: 0.15, Kanthal, 60-75W
Intake Clapton Mesh: 0.20, Kanthal+Nichrome, 60-75W
Others:
Dont know yet about other compatibilities

Everytime i see that about tea tree fiber it makes me think like it must taste so good, like a hint of tea, even tho i know it probably doesnt taste like anything, brilliant marketing move

 

[OzoreXS]

well. bad/good news.
I´ve discovered the Ijoy Shogun/Katana/Avenger/Captain. All of them uses a good bunch of around 15/18 different compatible coils from the brand. I´m falling in love with these ones.
...shit. I will not be able to choice one if I dont stop looking around LOL