vapesmarter
Mod Maker
- Joined
- Jun 12, 2016
- Messages
- 6,986
@leeo666 send me a message wanting a mod for a 41mm attey
the attey is huge and so would need a huge mod we talked about twin tubes 3 tubes etc but the size is the problem 41mm would mean a min of a two-inch mod wide in all directions, that's without the board and all the wires
so I've gone for a 26650 battery mod mosfet the 26650 battery will pulse at 60amps so will provide a lot of power
not had the most brilliant of days today my small extractor in the workshop died, in fact, the motor bearing disintegrated and it went over beating itself to death then whilst working on a squonker I took the top out with the miller by mistake.... all fun and games
I've gone back in time and I am watching a music DVD I found in a box
"Rattle And Hum" by U2
No stars in the black night
Looks like the sky fell down
No sun in the daylight
Looks like it's chained to the ground
Chained to the ground
The warden said
"The exit is sold If you want a way out Silver and gold"
this is the block tubes are a real pain to do sometimes I must admit
I do not have many pictures of the making because I'm not a pillock and I have bills to pay so here is a picture of Alfie eating toast and marmite (he loves toast and marmite)
but here is the top plate
it is in the center it is its miked up in the center
first mockup with some shaping going on
in the setting sun
there is a load of silver in this mod where it is I do not know, stabwood is like that
that hole for the 26650 is a nightmare to drill 29mm in one go
so @leeo666 "silver and gold is ready for you leather bagged and boxed
so you thought camlia was tonight not silver and gold
could be coming soon
I know all the red-blooded men are waiting for Lisa holding Camila
if you love my mods, cases, attey rigs, cabinets, drip tips, stands then like them follow me and....... buy one
the attey is huge and so would need a huge mod we talked about twin tubes 3 tubes etc but the size is the problem 41mm would mean a min of a two-inch mod wide in all directions, that's without the board and all the wires
so I've gone for a 26650 battery mod mosfet the 26650 battery will pulse at 60amps so will provide a lot of power
not had the most brilliant of days today my small extractor in the workshop died, in fact, the motor bearing disintegrated and it went over beating itself to death then whilst working on a squonker I took the top out with the miller by mistake.... all fun and games
I've gone back in time and I am watching a music DVD I found in a box
"Rattle And Hum" by U2
No stars in the black night
Looks like the sky fell down
No sun in the daylight
Looks like it's chained to the ground
Chained to the ground
The warden said
"The exit is sold If you want a way out Silver and gold"
this is the block tubes are a real pain to do sometimes I must admit
I do not have many pictures of the making because I'm not a pillock and I have bills to pay so here is a picture of Alfie eating toast and marmite (he loves toast and marmite)
but here is the top plate
it is in the center it is its miked up in the center
first mockup with some shaping going on
in the setting sun
there is a load of silver in this mod where it is I do not know, stabwood is like that
that hole for the 26650 is a nightmare to drill 29mm in one go
so @leeo666 "silver and gold is ready for you leather bagged and boxed
so you thought camlia was tonight not silver and gold
could be coming soon
I know all the red-blooded men are waiting for Lisa holding Camila
if you love my mods, cases, attey rigs, cabinets, drip tips, stands then like them follow me and....... buy one
Last edited:
