vapeciga.com
Initiate
- Joined
- Aug 30, 2019
- Messages
- 43
The nozzle is top wide and bottom narrow at the inner diameter of the mouth, and the bottom is a straight-through type, which can provide a certain condensing and recirculating ability;The Steam Crave Glaz Mini MTL RTA is the same as the previous one, which is the push-pull top cover and one of the most difficult ways to break the pressure balance in the chamber when the top cover is closed. The 9*3mm oil filling hole is pretty sufficient, and the pushing resistance is slightly tight, whereas. There is a groove for the finger pad, so there is no need to worry about oil leakage after a long time of use. In addition, it can be easily disassembled by simply removing the internal screw. Both the convenience and stability of cleansing or replenishing oil have improved a lot.
Even though the removable air intake adjusting ring is at the bottom and the height is too low, the full plaid pattern still brings the frictional force for rotation. The plaid element is also in the RTA feature produced by Steam Crave.
When the airflow enters the bottom air intake holes, it will be turned into the central concentrated oblique direction by the inner air intake hole. However, the difference from the previous one is that the inner air inlet hole is turned from the oblique direction to the full level. The inner wall of the two ends allows the airflow to reflect and cover the coil, and at the same time, the vertical and horizontal intersection of the inner wall has a quite inconspicuous inclination.
Steam Crave Glaz Mini MTL RTA makes a change in the groove at the bottom of the cotton foot except for the inner air inlet. The first version uses a pair of double holes to absorb the oil, and the Steam Crave Glaz Mini MTL RTA is directly replaced with a large guide. The oil hole, although it is the same convenient way to plug the cotton, has a superior oil guiding effect.
Steam Crave Glaz Mini MTL RTA has two advantages that I appreciate the most. The first one is naturally a larger area of transparency, and the second one is the design of the inner air intake and its inner wall. The slope changes the direction of the intake and the angle of reflection. These inconspicuous yet computationally ingenious designs make this coil erect more versatile. In the previous RTA, I would recommend that the coil be close to the outside. The Steam Crave Glaz Mini MTL RTA should only be placed vertically with the lock wire hole, so that you can enjoy the vape directly through the nozzle.
Even though the removable air intake adjusting ring is at the bottom and the height is too low, the full plaid pattern still brings the frictional force for rotation. The plaid element is also in the RTA feature produced by Steam Crave.
When the airflow enters the bottom air intake holes, it will be turned into the central concentrated oblique direction by the inner air intake hole. However, the difference from the previous one is that the inner air inlet hole is turned from the oblique direction to the full level. The inner wall of the two ends allows the airflow to reflect and cover the coil, and at the same time, the vertical and horizontal intersection of the inner wall has a quite inconspicuous inclination.
Steam Crave Glaz Mini MTL RTA makes a change in the groove at the bottom of the cotton foot except for the inner air inlet. The first version uses a pair of double holes to absorb the oil, and the Steam Crave Glaz Mini MTL RTA is directly replaced with a large guide. The oil hole, although it is the same convenient way to plug the cotton, has a superior oil guiding effect.
Steam Crave Glaz Mini MTL RTA has two advantages that I appreciate the most. The first one is naturally a larger area of transparency, and the second one is the design of the inner air intake and its inner wall. The slope changes the direction of the intake and the angle of reflection. These inconspicuous yet computationally ingenious designs make this coil erect more versatile. In the previous RTA, I would recommend that the coil be close to the outside. The Steam Crave Glaz Mini MTL RTA should only be placed vertically with the lock wire hole, so that you can enjoy the vape directly through the nozzle.
Last edited:
