SX mini TC settings HELP

[ILPLAYNEBODY]

I want to run this so I can TASTE flavor.

My coils are SS316L 2.5mm 0.15 oms Trying to run duals

With my SX Mini G with a KYLIN RTA. I would like recommended settings for the best flavor. Thanks in advance.

Anything from TCR settings/Joule/Temperature would be GREAT HELP. Thanks in advance.

 

[zouzounaki]

Do you think the flavour will be better with tc mode?

 

[ILPLAYNEBODY]

Do you think the flavour will be better with tc mode?

I would like to run TC mode just for those smooth draws. Any recommendations are welcomed.

 

[zouzounaki]

Mine’s an m class but the menu is probably the same. Try this: click the fire button 5 times. The click the fire button to go through the menu. Put it into joules mode. Then keep going through the menu and set your joules and temperature. I think there will be something in there to select the wire type as well. Mine doesn’t have this as I’ve never updated the firmware.

See how you get on with that.

 

[nwhornet]

Ohm's will be too low for consistency with SS. SS doesn't have a wide resistance range from cold to hot & the mod will struggle to adjust power accordingly. The higher the ohm the better the mod can see variations in resistance, the better the vape.

 

[ILPLAYNEBODY]

Ohm's will be too low for consistency with SS. SS doesn't have a wide resistance range from cold to hot & the mod will struggle to adjust power accordingly. The higher the ohm the better the mod can see variations in resistance, the better the vape.

What do you recommend for coils. Kylin RTA

 

[nwhornet]

If your making your own then SS316L, 28awg, 5-6 wraps at 3mm dia, dual coil around 0.3 ohm (0.6-0.7ohm each coil). Haven't felt the need for TC coils in the Kylin, vapes fine in power mode once you've cracked the wicking.

 

[ILPLAYNEBODY]

If your making your own then SS316L, 28awg, 5-6 wraps at 3mm dia, dual coil around 0.3 ohm (0.6-0.7ohm each coil). Haven't felt the need for TC coils in the Kylin, vapes fine in power mode once you've cracked the wicking.

Thank you for the information. With the coils I posted. I'm running duals and the resistance Always is between 10-13. Sorry if I'm bugging, just want be on the safe and effective side by all means.

 

[zouzounaki]

You might be better getting a roll of wire and making the coils yourself, that way you can add extra wraps to get the resistance you’re after.

 

[nwhornet]

Thank you for the information. With the coils I posted. I'm running duals and the resistance Always is between 10-13. Sorry if I'm bugging, just want be on the safe and effective side by all means.

They're fine for wattage mode on your mod, just no good for TC.