TC kicking in randomly Subtank Mini

[bat71]

Hi

I have a recent problem with TC kicking in at what doesn't seem to be anything close to the temp setting I have on my mod (Evic VCT Mini).

Until now have had not had this problem, was all working great.

I have tightened the base of the RBA after reading it as a suggestion and it seems to have helped a bit but still getting the odd duff draw..

Anything else i could try, just not sure what is happening.

Wondering if everything might just need a good clean, or if it is a fault with the mod/tank..

 

[Tubbyengineer]

Hi

I have a recent problem with TC kicking in at what doesn't seem to be anything close to the temp setting I have on my mod (Evic VCT Mini).

Until now have had not had this problem, was all working great.

I have tightened the base of the RBA after reading it as a suggestion and it seems to have helped a bit but still getting the odd duff draw..

Anything else i could try, just not sure what is happening.

Wondering if everything might just need a good clean, or if it is a fault with the mod/tank..

It sound's most like a wicking problem, If juice isn't flowing to the coil fast enough you'll get a cold weak vape, check your wicking isn't too tight and that you're not using a juice thats too thick for the tank. Next most likely problem is an intermittent poor connection, check EVERY connection point and ensure they're clean and tight...

 

[bat71]

It sound's most like a wicking problem, If juice isn't flowing to the coil fast enough you'll get a cold weak vape, check your wicking isn't too tight and that you're not using a juice thats too thick for the tank. Next most likely problem is an intermittent poor connection, check EVERY connection point and ensure they're clean and tight...

OK cheers, have been speed wicking of late as got a lot on, so maybe need to take a bit more time over it, and clean the parts a bit