Temp Control Guinea Pigs Needed

[stealthvape]

This is wild in a squonk

Worked out that our NiFe's TCR is actually more like 4920 not 5000

You'll love this

 

[nwhornet]

Got this set up on a Drone with a Wasp (not the best for testing), 28AWG, 3mm, 8 wraps @ 0.25ohm & spot on despite the whistling. Will be trying it on a Dead Rabbit SQ later so should be even better. Also did a dual coil on the Kensei @ 0.17ohm & superb . Thanks Rob @stealthvape

 

[stealthvape]

Got this set up on a Drone with a Wasp (not the best for testing), 28AWG, 3mm, 8 wraps @ 0.25ohm & spot on despite the whistling. Will be trying it on a Dead Rabbit SQ later so should be even better. Also did a dual coil on the Kensei @ 0.17ohm & superb . Thanks Rob @stealthvape

Excellent, thanks for testing it. Noticed a drop off after the mod had sat for a night, but that's it refining overnight to a true base resistance. Never had such a nice vape at 261C

 

[nwhornet]

Excellent, thanks for testing it. Noticed a drop off after the mod had sat for a night, but that's it refining overnight to a true base resistance. Never had such a nice vape at 261C

Done 3 tanks on the Kensei this morning trying different custards & temps, settling around 470f so not far off . Just putting an order in but no Ni200 at 30agw . Will get some Ni80 for playing with .

 

[stealthvape]

I'll have to check if we've got some. Easy to let ni200 slip as it barely sells

 

[nwhornet]

I'll have to check if we've got some. Easy to let ni200 slip as it barely sells

Cheers Rob. Have placed an order now so no biggie.
Anyway have stuck a coil in the Dead Rabbit sq & bloody good. Had to go up to 520f as it's an airy bugger. Will try a couple of less wraps next time. Thanks again for the cvs as I could never get a decent vape previously with NiFe30 but I may have to spend some more money now

 

[stealthvape]

316l later with some luck

 

[nwhornet]

Good, got shed loads & TC has been hit & miss. When it's miss I just drop back to watts until I recoil.

 

[stealthvape]

I think a lot of it is choosing the right atty

Here's 316L, I got an effective TCR of 883 vs the stock 879 so bang on what it should be

 

[nwhornet]

Not been so lucky with the SS unfortunately. Tried it on the Drop & SQ but not as consistent as NiFe30, as was the Aromamiser. Don't tend to go below 0.3ohm as I find it's inconsistent. Will try some more builds tomorrow. Off topic, the Runt stand is brilliant, fantastic quality. Thanks for the super quick delivery.