Thank you! - but slight issue

[manic_asif]

Hi Myepack,

Firstly, thank you very much for the super fast delivery!

Safely received the iTaste VV 3.0 and it works a treat!!

However, I also purchased the Kanger Protank 2 and some spare coils - but I just can't seem to get it to work!

I have followed the instructions to the letter, but it just won't vape! In fact some of the e-liquid leaks. I have check all the O-rings, etc and seems to be fine

what am I doing wrong?

I basically unscrewed the base, added some juice, inserted the coil and closed up again and thought I should be good to go - when connected to the battery (have tried with the new iTaste VV 3.0 battery, ut also a standard ego 1100mAh battery - but when connected I am unable to 'suck' - almost like its blocked

perhaps, I should have asked this before - but is the Kanger ProTank2 actually compatible with the iTaste??

Any help will be greatly appreciated

Asif

 

[KulrMeStoopid]

Have you emailed them? Thats a good way to get in touch with them.

myepack <-- tagged them for you

 

[Phantom Diablo]

did you screw the coil into the base or insert it straight into the tank?
the coil needs to be screwed in if i recall first

 

[manic_asif]

did you screw the coil into the base or insert it straight into the tank?
the coil needs to be screwed in if i recall first

Yep, screwed into the base and checked all seals - very strange

 

[manic_asif]

Have you emailed them? Thats a good way to get in touch with them.

@myepack <-- tagged them for you

Thanks - will do that now, in case they don't check the forumAsif

 

[Fleabag]

Sounds as though the air hole is blocked. If you take it off the battery and blow, it might dislodge a blockage or check the hole in the botton of the tank (the bit that connects with the battery) and see if you can see anything bocking the hole in the middle.

If anything, Protanks are quite airy, so you shouldn't find you can't draw on it

Yes - they are compatible with the itaste

 

[KulrMeStoopid]

Thanks - will do that now, in case they don't check the forumAsif

Yeah that should always be your first point of contact

 

[manic_asif]

Sounds as though the air hole is blocked. If you take it off the battery and blow, it might dislodge a blockage or check the hole in the botton of the tank (the bit that connects with the battery) and see if you can see anything bocking the hole in the middle.

If anything, Protanks are quite airy, so you shouldn't find you can't draw on it

Yes - they are compatible with the itaste

Hi, the air hole is definitely not blocked - I can draw from it when empty and when filled.

The issue only happen when I connect to the battery, then I can't draw on it all (well if suck really hard I just liquid in my mouth!)

when I ignite the battery, I hear the 'sizzle' but cannot draw on it

also, when I do disconnect the battery, the lquid leaks out of the battery screw opening

something is not right - its not the most complicated of devices - so, can't understand what's going on

nearly wasted 5ml faffing with this :-)

 

[KulrMeStoopid]

Can you take a pic of the unit put together?

 

[manic_asif]

Can you take a pic of the unit put together?

not at the moment, don't have a camera handy - but will when I get home tonight