Think I nailed it

[Tazd]

OK first off all the pervs can get their minds out of the gutter this is not one of those posts [emoji102]

After a couple of months messing around with different wires and trying different cotton and coil sizes I have pretty much found my preferred setup on my Dead Rabbit RTA. Found that a 26 gauge SS316 at 3.5mm is the right size. As to wicking it I have enough so I just goes through the coil with almost zero resistance and cut it so it about 2 mm below where the wick goes in to the juice holes. I then give each side a very light fluff and then cut it to a V that goes about half way up to the coil.
For me this just seems to give me the best flavour., not to bothered by the cloud as for me it's all about flavour and staying away from the stinkies.
Hopefully this may help someone in their hunt for finding their perfect vape.
Next is doing the same on the Dead Rabbit SQ and after that I think maybe a profile rda is next on the play list when finance's allow.
Oh nearly forgot the mod (a Wisemec RX2 21700) is set at 29.4 Watts
Oh other thing I forgot to mention was the coil Ohms out at 0.66 and using cotton god's cotton

 

[JoeMac]

Thanks for you post @Tazd
As it happens I've been mucking around with the DR over the last few days and been unhappy with the flavor I've been getting from it. Can I ask how may wraps you've been doing in your build, 8?
Will give your method a go.

 

[Tazd]

Yep 8 wraps. Should have included that in the original post..

 

[BULLDOG1964]

Nice one mate will give that a go on mine ive just picked up some SS316 26awg......

 

[mikeuk]

When I wick I now use enough cotton that it pulls straight through with no resistance, I pull each wick all the way through, take off the scruffy bits and I'm good to go.

 

[Toastie]

Nice, had a similar experience with the Hastur Mini yesterday. Trying to get throat hit. I ended up wicking it a lot looser than I normally would, almost no resistance through the coil. Then turned the wattage up more and hey presto.

I was amazed, I thought I'd get dry hits with so little cotton in there and leaking due to having so little cotton in the juice ports.