What's new

Throat feels raw

YoungLeiva

Postman
Joined
Nov 29, 2013
Messages
114
When I use my kayfun is all well, my friends dripper it's all good but when it comes to mine it feels rough on the throat . I built his dripper the same as mine and his doesn't do that so I thought it would prob be my juice but I tried 4 different if my juices and they all do that. I have a dual micro coil... What could be causing it to do that? ImageUploadedByTapatalk1393464569.988149.jpg
 
Just gonna throw this in there as a process of elimination , Battery voltage....Maybe. Not enough power.
 
How about coil placement? Are your coils as close to the air holes as possible? The height off the deck also affects the vape... too high and the vapor starts to get harsh.
Take your wicks out and check for a hot leg perhaps?
 
Yes coil placement particularly in relation to the air holes is really important lower them just a little and you may find you get a smoother vape

Sent from my HTC One X using Planet of the Vapes mobile app
 
How about coil placement? Are your coils as close to the air holes as possible? The height off the deck also affects the vape... too high and the vapor starts to get harsh.
Take your wicks out and check for a hot leg perhaps?


Yes coil placement particularly in relation to the air holes is really important lower them just a little and you may find you get a smoother vape

Sent from my HTC One X using Planet of the Vapes mobile app

It's not a hot leg because I dry burn them and make sure everything is good before I put cotton but I will try lowering the coils... The first day I built it , it was working fine didn't move the coils or anything and after I changed cotton (2 days later) it's been harsh. I will try lowering the coils in a bit and see if that fixes it
 
It may just be a case of coilers curse Ive made coild before that for absolutely no reason should have not worked great but yet somehow it doesn't so I've stripped it remade the coils the same way and 2minutes later I'm in blissful clouds of vapor

Sent from my HTC One X using Planet of the Vapes mobile app
 
It's not a hot leg because I dry burn them and make sure everything is good before I put cotton but I will try lowering the coils... The first day I built it , it was working fine didn't move the coils or anything and after I changed cotton (2 days later) it's been harsh. I will try lowering the coils in a bit and see if that fixes it
We'll eventually figure it out...
It looks like your coils could be moved closer to the air holes as well. I have my coils nearly touching the rim of my atty. Huge improvement!
 
It may just be a case of coilers curse Ive made coild before that for absolutely no reason should have not worked great but yet somehow it doesn't so I've stripped it remade the coils the same way and 2minutes later I'm in blissful clouds of vapor

Sent from my HTC One X using Planet of the Vapes mobile app


We'll eventually figure it out...
It looks like your coils could be moved closer to the air holes as well. I have my coils nearly touching the rim of my atty. Huge improvement!

I have no wire to redo them atm but hopefully we can get them to work properly till Friday . Hopefully moving them down helps... I'll let you guys know how it works out imma try it rn
 
Back
Top Bottom