This is my own opinion and does not reflect on POTV vendors or manufacturers.
Product: UD AGT titanium
Vendor: Safercigs
Price: £28
Opened my vapemail this morning to a small surprise being the AGT, my first impression was "Now that is cute". The AGT is a titanium genesis style atty which has a juice capacity of 1.5ml, the platform has 3 holes the wick hole being approx 2mm possibly smaller, there is also two phillips screws one being the negative and the other the filling hole. The center post has one larger and 1 smaller nut. First thing I would say is do not underestimate this atty by its size, for those of you used to genesis setup it is just the same but on a smaller scale, when I had the ss mesh rolled to size I thought that the vape experience would be just ok. I used the mesh supplied with a few spares in a bag which came with the atty (spare screw, center post nut, O rings and a short length of coil wire, plus a spare delrin insulator). I decided to use my .2 kanthal for the coil and at 5 wraps the resistance came out at 1.5 ohms. As I said earlier don't underestimate this one by its size, I filled the tank with homemade 50/50 27mg juice flavoured honeydew melon and set my SVD to 7 watts, the vape quantity was astonishing and the flavour outstanding, also an awesome throat hit, this thing is a small vape bomb comparable to the vape of a larger size such as the AGA T2. For me this is equal if not slightly better performance to my genesis did and at a fraction of the cost I do recommend this to anyone into the genesis type devices you WILL be very suprised. 9.5 out of 10
Best regards
Simon
Product: UD AGT titanium
Vendor: Safercigs
Price: £28
Opened my vapemail this morning to a small surprise being the AGT, my first impression was "Now that is cute". The AGT is a titanium genesis style atty which has a juice capacity of 1.5ml, the platform has 3 holes the wick hole being approx 2mm possibly smaller, there is also two phillips screws one being the negative and the other the filling hole. The center post has one larger and 1 smaller nut. First thing I would say is do not underestimate this atty by its size, for those of you used to genesis setup it is just the same but on a smaller scale, when I had the ss mesh rolled to size I thought that the vape experience would be just ok. I used the mesh supplied with a few spares in a bag which came with the atty (spare screw, center post nut, O rings and a short length of coil wire, plus a spare delrin insulator). I decided to use my .2 kanthal for the coil and at 5 wraps the resistance came out at 1.5 ohms. As I said earlier don't underestimate this one by its size, I filled the tank with homemade 50/50 27mg juice flavoured honeydew melon and set my SVD to 7 watts, the vape quantity was astonishing and the flavour outstanding, also an awesome throat hit, this thing is a small vape bomb comparable to the vape of a larger size such as the AGA T2. For me this is equal if not slightly better performance to my genesis did and at a fraction of the cost I do recommend this to anyone into the genesis type devices you WILL be very suprised. 9.5 out of 10
Best regards
Simon
