Uneven Battery Drain

[SiloHD]

Good afternoon, i quit smoking with the aegis legend mod, i recently bought the smok morph and have noticed one battery drains alot quicker than the other, is this normal as its the same batteries i used in my aegis and the batteries do not drain unevenly.
thank you for your help

 

[Simon G]

It's normal for a smok mod.

 

[SiloHD]

It's normal for a smok mod.

Thank you for that, i wasn't sure if there was a problem with it... just rather annoying at times

 

[Simon G]

Thank you for that, i wasn't sure if there was a problem with it... just rather annoying at times

Well it's not ideal but it's been mentioned a fair few times on here with various mods.... so I would say it's not uncommon.

It's also not sure how far they are really out, without measuring the true voltage outside of the mod it's kind of hard to judge whether it could be a problem or not.

 

[Frogprince]

Try popping them in the aegis when there unevenly drained to check if its the mod giving wrong readings.

 

[Deleted member 58360]

Swap the battery locations and see if the displayed levels follow them...

 

[Mr Ripple]

Swap the battery locations and see if the displayed levels follow them...

^^^This^^^^
It's often just the mod not reading them correctly.

 

[SiloHD]

Swap the battery locations and see if the displayed levels follow them...

good idea i will check that, i have just put in fully charged batteries so i will monitor it and update, thank you

 

[Tazz]

Good afternoon, i quit smoking with the aegis legend mod, i recently bought the smok morph and have noticed one battery drains alot quicker than the other, is this normal as its the same batteries i used in my aegis and the batteries do not drain unevenly.
thank you for your help

Just swap em around in the same mod and see if the reading changes. If I had a mod that seemed to drain one more than the other but all was otherwise ok, then I just swap sides each time I removed/replaced them. Even it all up.

 

[SiloHD]

Swap the battery locations and see if the displayed levels follow them...

ok so i have swapped batteries around and the display levels do not follow them, it remains the same readings