Vamo V5

[PastaCore]

i am having problems with the firing pin, I know common thing with the Vamo, if I screw the atty on more than a few turns IE still wobbling it shows short or low Ohms, is there a fix I can do to remedy this.

In anticipation Gio.

 

[Gilliandrea]

PastaCore Sounds like the silicon grommet has broken and there is a short with the centre pin touching

I had this a few months ago here is the fix I used here

 

[Vapingmonkey]

You could try lifting the centre pin slightly using a paperclip to make contact, but be careful not to disconnect it

Also, if you are using something like a Protank, use a tank plinth to keep you from overtightening, also your tank will sit alot better on the Vamo

 

[PastaCore]

@PastaCore Sounds like the silicon grommet has broken and there is a short with the centre pin touching

I had this a few months ago here is the fix I used here[/QUOTE

Excellent I will replace the grommet, thanks.

 

[PastaCore]

Thanks Gilliandrea, works better now than when I first got it new, I put a good quality grommet in and it's working a treat.

Many thanks. Gio.

 

[Gilliandrea]

Thanks Gilliandrea, works better now than when I first got it new, I put a good quality grommet in and it's working a treat.

Many thanks. Gio.

Glad I could help