WANTED: People for testing our new device

[JAC Vapour]

Problem with that is the tank will leak out the bottom if it's full of juice and not inserted into the device. The airflow comes in the base of the tank and up thru the coil. And that's where the juice will also come out from

A tank will sit full no issue, the only reason the tank will leak is if the topfill cap is loose, this allows the pressure to force eliquid out, but if the top cap is tight, no issues. I have tested, there's a full tank on my desk that has been there for around 4 weeks now, and no leaks.

 

[JAC Vapour]

That wouldnt work.
The Mi-pods are a closed pod whereas the VIM tank would leak through the coil.
I just fitted the .5 ohm coil, forgetting I hd nic salts in the tank and I blew my head off.
Im a bit spinny now...

the tank will sit full or should do no issue

 

[JAC Vapour]

ah ok. thats a shame having multiple tanks on the go would be usefull.

But thinking about it, it could work. If you had it in a really tight case that sealed the bottom of the tank and you inserted the tank into the case upside down you could then carry it around normally. But when you took it out of the case you would have to take it out upside down. Then the juice would drip back into the tank instead of leak out the botton. Definitely not ideal but with some effort and being careful it could be done.

You would be able to do it if you have two rubber stoppers that fits in the base of the tank and in the drip tip. You would have to put the base one in/out first and the drip tip one in/out last so you don't get any leaking when inserting or removing.

please test filling up a tank and leaving overnight, it will not leak, so long as a coil is fitted, the internal air pressure will hold the liquid in place for as long as needed. If you release the topfill and leave overnight, it will leak, as the pressure allows liquid to run through the coil, so as long as your topfill cap is firmly on and the coil is installed, you should get no leaks and can carry and leave tanks full out of the device.

 

[MrDJ]

you should have received an email with a link to a form you can fill in and submit online, the link is also mentioned a few posts back.

Sounds like a few of us didn't receive the form link by email Andy. I got mine from your earlier post on here so all good now.

Few things from me:
I've seen the mention a few times of the typo in the user manual. Mine does actually turn blue but only through use which I'm guessing shows half power. Took almost 7 hours to charge yesterday so was a bit worried it was buggered but finally went green.
1ohm tested and now on the 0.5 which has come to work with me today and is the first time I've left the S22 at home since I got it in October.
Only minor issue I've had so far is it's best to use a needle point nozel otherwise it can drip down the chimney.
Time for tea break or in other words vape break.

 

[DjDoc]

Sounds like a few of us didn't receive the form link by email Andy. I got mine from your earlier post on here so all good now.

Few things from me:
I've seen the mention a few times of the typo in the user manual. Mine does actually turn blue but only through use which I'm guessing shows half power. Took almost 7 hours to charge yesterday so was a bit worried it was buggered but finally went green.
1ohm tested and now on the 0.5 which has come to work with me today and is the first time I've left the S22 at home since I got it in October.
Only minor issue I've had so far is it's best to use a needle point nozel otherwise it can drip down the chimney.
Time for tea break or in other words vape break.

The dripping into chimmny was happening to me till I worked out it was the bottle nib causing it, all good now

 

[Simon G]

Sounds like a few of us didn't receive the form link by email Andy. I got mine from your earlier post on here so all good now.

Few things from me:
I've seen the mention a few times of the typo in the user manual. Mine does actually turn blue but only through use which I'm guessing shows half power. Took almost 7 hours to charge yesterday so was a bit worried it was buggered but finally went green.
1ohm tested and now on the 0.5 which has come to work with me today and is the first time I've left the S22 at home since I got it in October.
Only minor issue I've had so far is it's best to use a needle point nozel otherwise it can drip down the chimney.
Time for tea break or in other words vape break.

yup, blue is half charge 3.3v- 3.8v (in operation) it says so in the manual ... but when charging it just shows red - green.

 

[JAC Vapour]

feedback form is here for those that have not yet found it: https://www.cognitoforms.com/JACVapourLtd/VIMFeedback

 

[lene]

why does the feed back form want a signature ? I couldn't do it. ended up with a black dot. does this matter?

 

[HEISENBERG88]

I want one - when is release?

 

[JAC Vapour]

why does the feed back form want a signature ? I couldn't do it. ended up with a black dot. does this matter?

That will be fine