We do up to 0.35mm Kanthal A-1 now

[stealthvape]

For those amongst you that like stupidly low resistance coils or experimenting with new stuff.

The resistance per metre isn't much of a drop from wire to wire with the larger gauges, but the difference between 0.30 and 0.35 is enough to probably burn the hairs on your nose so easy does it

0.30mm	20.11 Ω/m
0.31mm	18.85 Ω/m
0.32mm	17.35 Ω/m
0.33mm	16.21 Ω/m
0.34mm	15.33 Ω/m
0.35mm	14.88 Ω/m

 

[Gilliandrea]

stealthvape

Can you clarify on the sticky thread you have 0.30 Kanthal A-1 as 19.60, but here you have as 20.11?

I know it is a minimal amount

 

[stealthvape]

New stock as of today, slightly different numbers. The old number is still right for the reels, that are almost out of stock. The 0.30mm supplied on cards will be 20.11. Different batches come out slightly different at the factory.

The reels when they are restocked may well vary up or down half an ohm per metre too. I should probably update the resistance table to the new figure as that's what we have most of as we're about to run dry of reels

 

[Gilliandrea]

Excellent, thank you

Highlighted both in the list on the Wiki, so may need to remove one.

However looking at the table there is very little difference when you cut less than 5cm lengths