Which mod for a 25mm atty?

[Mr Numpty]

Quite interested in picking up a 4ml Aromamizer Supreme when available but I believe it's 25mm diameter and none of my mods can handle that without an overhang. Am I right in thinking that it would still overhang the front of the Cuboid?
Anyway, what mods are big enough and bad enough to handle 25mm? Must be TC with TCR settings.

 

[Ment]

The X Cube is big enough, a full size Subtank overhangs it by about half a mm all round, you can't really see it.

It will fit on the the Encom TNT 80 with room to spare, but this a 26650 mod and it may be hard to find.

I'm a bit OCD about these things and adapted a mech by sticking a SMPL inside a bit of 25mm SS pipe for my Subtank.

 

[Smut]

Rx200, Presa TC100W

 

[Fellowgecko]

Not sure about it sitting on the x cube, I have a 26mm atty and it overhangs it by a fair bit.

The rx200 is one of the widest regulated mods i believe

 

[Clownstyle]

RX200 what a cracking mod for the price.

 

[Ment]

Not sure about it sitting on the x cube, I have a 26mm atty and it overhangs it by a fair bit.

The rx200 is one of the widest regulated mods i believe

Without checking, it looked to me like it would overhang the RX200 at the front, but now I've checked and it's a perfect fit.

 

[RichieRich]

Cuboid will handle it no problem. Had the TFV4 biggie on it and there was probably only 1mm overhang on one side of the mod which was no issue.

 

[Mr Numpty]

Rx200, Presa TC100W

Been looking at the Presa. Might be a good option, thanks.

 

[Mr Numpty]

Cuboid will handle it no problem. Had the TFV4 biggie on it and there was probably only 1mm overhang on one side of the mod which was no issue.

What diameter is that?

 

[bellyman]

Ibox Boxer holds a full size TFV4 nicely.