Yet another problem

[m1ck10v1n]

Hello again, I have cuboid 150w and twistedmesses rda... Every coil I have put in it has shorted...
Its getting rather annoying as it's everyday.
Any idea why?
Thank you

 

[fyslexic ducker]

Have you checked to make sure there is no loose coil wire shorting it from where you have clipped your excess wire,a little slither of wire fallen in there can be enough to cause a short

 

[m1ck10v1n]

No lose wire at all, the coils are not even close to touching... I cannot figure it out

 

[m1ck10v1n]

BTW it's twisted kanthal 28g

 

[stewbacca]

Any chance you can post a photo of your build?

 

[m1ck10v1n]

Bit blurred but it'll do.

 

[jools]

Are you sure the coils are not touching the cap when you place it back on ?

 

[m1ck10v1n]

I made sure they wasn't

 

[stewbacca]

Bit blurred but it'll do.

View attachment 91618

Looks a nice tidy build. I'd suggest moving the coils a little further away from the positive post. It may be worth checking the 510 is screwed in nice and secure. Other than that I can't see much else wrong with it. Can you try your atty on another protected mod? Also I'm assuming you haven't got a load of wire sticking through the post holes on the other side to the coil?

 

[m1ck10v1n]

I always make sure they are not, everything is screwed in correctly.
I only have one mod that can fire it, my other is mvp v2 which goes as low as 1.0.