vapesmarter
Mod Maker
- Joined
- Jun 12, 2016
- Messages
- 6,975
The burnt lands is for sale
it's a clickfet squonker that gives you all the safeguards of a regulated except for the adjustable voltage
here is the making thread
https://www.planetofthevapes.co.uk/...t-squonker-hybrid-stabwood-to-be-sold.176295/
and here is the specs of a clickfet
Specifications
- Dimensions: 15mm x 12mm
- Mosfet:- N-Channel 30v 100A LFPAK, RDSon 1.35m Ω (typ), VGS(th) 1.46v (typ)
- Operational voltage: 3.1 ± 0.1V - 4.20v
- Low voltage protection: 3.1 ± 0.1V
- Reverse polarity protection: Yes. Mod will auto fire but board will not burn out.
- Idle current: <10uA
- Timeout Protection: Yes
- Amp Limit: 46.67A (4.2v @ 0.09Ω)
Functions and LED Information
- Low Resistance Protection: When resistance is 0.08 ± 0.01Ω LED's flash 3 times and will not power the mosfet. This is also Short Protection.
- On/Off Function: When off, 5 clicks turns on and LEDs flash 5 times. When on, 5 clicks turns off and LED's flash 5 times.
- Low Voltage: When battery is lower than 3.1 ± 0.1V LEDs flash 10 times and will not power the mosfet.
- Time Out Protection: If the mod is fired for 10 ± 1s the LEDs will flash 8 times and will stop powering the mosfet.
- Reverse Polarity Protection. If the battery is around the wrong way the mod will fire.
- In Use: When powering the mosfet the LEDs will be on.
but you still need to know ohms law and battery safety
the mod is boxed and bagged with extras
normal vapesmarter warranty is supplied as I am a maker and registered
PayPal G and S only
price including delivery £150 all in as its still January so sale terms apply
pic below the screw is now tightened flush BTW
it's a clickfet squonker that gives you all the safeguards of a regulated except for the adjustable voltage
here is the making thread
https://www.planetofthevapes.co.uk/...t-squonker-hybrid-stabwood-to-be-sold.176295/
and here is the specs of a clickfet
Specifications
- Dimensions: 15mm x 12mm
- Mosfet:- N-Channel 30v 100A LFPAK, RDSon 1.35m Ω (typ), VGS(th) 1.46v (typ)
- Operational voltage: 3.1 ± 0.1V - 4.20v
- Low voltage protection: 3.1 ± 0.1V
- Reverse polarity protection: Yes. Mod will auto fire but board will not burn out.
- Idle current: <10uA
- Timeout Protection: Yes
- Amp Limit: 46.67A (4.2v @ 0.09Ω)
Functions and LED Information
- Low Resistance Protection: When resistance is 0.08 ± 0.01Ω LED's flash 3 times and will not power the mosfet. This is also Short Protection.
- On/Off Function: When off, 5 clicks turns on and LEDs flash 5 times. When on, 5 clicks turns off and LED's flash 5 times.
- Low Voltage: When battery is lower than 3.1 ± 0.1V LEDs flash 10 times and will not power the mosfet.
- Time Out Protection: If the mod is fired for 10 ± 1s the LEDs will flash 8 times and will stop powering the mosfet.
- Reverse Polarity Protection. If the battery is around the wrong way the mod will fire.
- In Use: When powering the mosfet the LEDs will be on.
but you still need to know ohms law and battery safety
the mod is boxed and bagged with extras
normal vapesmarter warranty is supplied as I am a maker and registered
PayPal G and S only
price including delivery £150 all in as its still January so sale terms apply
pic below the screw is now tightened flush BTW
