Any help with a trident grand vaper clone

[sparky67]

I just received my trident grand vaper clone it's very strong tasting with my 24mg mix and there's not much vapour it has double coils on a 3 pole configuration and is running at 0.9 ohms any help

 

[Gaz1983]

I just received my trident grand vaper clone it's very strong tasting with my 24mg mix and there's not much vapour it has double coils on a 3 pole configuration and is running at 0.9 ohms any help

Any photos ?


Sent from my iPhone using Planet of the Vapes

 

[sparky67]

Not ATM will post later the coils were already fitted

 

[Gaz1983]

Not ATM will post later the coils were already fitted

Replace them I think would be the best bet sparky . What size air hole are you using ?


Sent from my iPhone using Planet of the Vapes

 

[thedarthVap3r]

there is your answer. take those horror shows out of their. and build yourself

ive used both v1 and v2 of the trident clones and they are my most used device . adore them !

when you rebuild it yourself , the vapor and flavour should be excellent

a little note for future.

if anything rba/rbd comes prewicked, the first thing you always do is take it out and bin it , then wash it down.

 

[sparky67]

Well it's about 2mm but not adjustable it draws loose which I'm used to after using my kayfun lite + would it be better if I used cotton instead of silica Gaz1983

 

[sparky67]

Cheers thedarthVap3r

 

[Gaz1983]

Well it's about 2mm but not adjustable it draws loose which I'm used to after using my kayfun lite + would it be better if I used cotton instead of silica Gaz1983

All day long mate


Sent from my iPhone using Planet of the Vapes

 

[thedarthVap3r]

Cheers @thedarthVap3r

no problem. also i just saw that you said the draw is not adjustable .

is it , if your finding 2mm too open , ( 2x1 i believe)

just rotate the topcap so it cuts the airholes in half , boom youve just halved the draw

 

[sparky67]

I might do a couple of 0.20(awg 32) double twist coils with cotton


Sent from my iPad using Planet of the Vapes