Aspire cleito RTA first build

[ukskater01]

Hi apes! I received my aspire cleito RTA on Thursday, I wicked it with the cotton that came with it and was impressed. Then I thought maybe I should rewick it on Saturday morning as I wanted to try a different flavour.Bad idea it seems, it wouldn't stop leaking [emoji17]
I emptied the tank and checked my wick, it seemed to be a bit near the air holes so I rewicked again. Same problem but only after I had used a tank of juice and then refilled the tank (with the air flow closed) and opened the airflow.
I nearly gave up and put a stock coil back on but luckily for me I won a coil building kit on here. Thanks to vapellie and darrowharrow (still need to pick up the cotton and wire from the post office from darrowharrow) I built my own coils and used the cotton I got in the kit.
I also read turning the tank upside down for about ten seconds with the air flow closed stops leaking so I did this and it seems to have worked.
Anyway here's some pics of my first go

Also before anyone says anything I'm going to get a ohm meter tomorrow.
I was wondering if it is normal when I was pulsing the coils one glowed quicker than the other? And does anyone have any tips to wick this deck perfectly?
Cheers and sorry for the essay!

 

[vapellie]

Congrats @ukskater01 that looks good!

One cool burning brighter than the other means that somehow the coils aren't "even", as electricity is lazy and likes to go down the easiest path :-)
Could be one coil is further away from the deck than the other. As long as they are fairly even it's ok. If there is a big difference then try moving the weaker one a bit closer to the deck.
Fiddly stuff this coil building! But looking good!

 

[vapellie]

Oh. And I don't use an ohmsmeter, I just use my mod.

 

[yappycat]

Looking good! Well pleased for ya